diff options
Diffstat (limited to '')
| -rw-r--r-- | tools/README.md | 75 | ||||
| -rwxr-xr-x | tools/unitc | 235 |
2 files changed, 310 insertions, 0 deletions
diff --git a/tools/README.md b/tools/README.md index 7dbf0781..f534aa1f 100644 --- a/tools/README.md +++ b/tools/README.md @@ -4,6 +4,9 @@ This directory contains useful tools for installing, configuring, and managing NGINX Unit. They may not be part of official packages and should be considered experimental. +* [`setup-unit`](#setup-unit) +* [`unitc`](#unitc) + --- ## setup-unit @@ -14,3 +17,75 @@ should be considered experimental. Unit repository for later installation. * `setup-unit welcome` creates an initial configuration to serve a welcome web page with NGINX Unit. + +--- + +## unitc + +### A curl wrapper for managing NGINX Unit configuration + +```USAGE: unitc [options] URI``` + + * **URI** specifies the target in Unit's control API, e.g. `/config` . + * Configuration data is read from stdin. + * [jq](https://stedolan.github.io/jq/) is used to prettify JSON output, if + available. + +| Options | | +|---------|-| +| filename … | Read configuration data consequently from the specified files instead of stdin. +| _HTTP method_ | It is usually not required to specify a HTTP method. `GET` is used to read the configuration. `PUT` is used when making configuration changes unless a specific method is provided. +| `INSERT` | A _virtual_ HTTP method that prepends data when the URI specifies an existing array. The [jq](https://stedolan.github.io/jq/) tool is required for this option. +| `-q` \| `--quiet` | No output to stdout. + +Options are case insensitive and can appear in any order. For example, a +redundant part of the configuration can be identified by its URI, and +followed by `delete` in a subsequent command. + +### Local Configuration +For local instances of Unit, the control socket is automatically detected. +The error log is monitored; when changes occur, new log entries are shown. + +| Options | | +|---------|-| +| `-l` \| `--nolog` | Do not monitor the error log after configuration changes. + +#### Examples +```shell +unitc /config +unitc /control/applications/my_app/restart +unitc /config < unitconf.json +echo '{"*:8080": {"pass": "routes"}}' | unitc /config/listeners +unitc /config/applications/my_app DELETE +unitc /certificates/bundle cert.pem key.pem +``` + +### Remote Configuration +For remote instances of NGINX Unit, the control socket on the remote host can +be set with the `$UNIT_CTRL` environment variable. The remote control socket +can be accessed over TCP or SSH, depending on the type of control socket: + + * `ssh://[user@]remote_host[:ssh_port]/path/to/control.socket` + * `http://remote_host:unit_control_port` + +> **Note:** SSH is recommended for remote confguration. Consider the +> [security implications](https://unit.nginx.org/howto/security/#secure-socket-and-state) +> of managing remote configuration over plaintext HTTP. + +| Options | | +|---------|-| +| `ssh://…` | Specify the remote Unix control socket on the command line. +| `http://…`*URI* | For remote TCP control sockets, the URI may include the protocol, hostname, and port. + +#### Examples +```shell +unitc http://192.168.0.1:8080/status +UNIT_CTRL=http://192.168.0.1:8080 unitc /status + +export UNIT_CTRL=ssh://root@unithost/var/run/control.unit.sock +unitc /config/routes +cat catchall_route.json | unitc POST /config/routes +echo '{"match":{"uri":"/wp-admin/*"},"action":{"return":403}}' | unitc INSERT /config/routes +``` + +--- diff --git a/tools/unitc b/tools/unitc new file mode 100755 index 00000000..838f7ebf --- /dev/null +++ b/tools/unitc @@ -0,0 +1,235 @@ +#!/bin/bash +# unitc - a curl wrapper for configuring NGINX Unit +# https://github.com/nginx/unit/tree/master/tools +# NGINX, Inc. (c) 2022 + +# Defaults +# +ERROR_LOG=/dev/null +REMOTE=0 +SHOW_LOG=1 +NOLOG=0 +QUIET=0 +URI="" +SSH_CMD="" +METHOD=PUT +CONF_FILES=() + +while [ $# -gt 0 ]; do + OPTION=$(echo $1 | tr '[a-z]' '[A-Z]') + case $OPTION in + "-H" | "--HELP") + shift + ;; + + "-L" | "--NOLOG" | "--NO-LOG") + NOLOG=1 + shift + ;; + + "-Q" | "--QUIET") + QUIET=1 + shift + ;; + + "GET" | "PUT" | "POST" | "DELETE" | "INSERT") + METHOD=$OPTION + shift + ;; + + "HEAD" | "PATCH" | "PURGE" | "OPTIONS") + echo "${0##*/}: ERROR: Invalid HTTP method ($OPTION)" + exit 1 + ;; + + *) + if [ -r $1 ]; then + CONF_FILES+=($1) + elif [ "${1:0:1}" = "/" ] || [ "${1:0:4}" = "http" ] && [ "$URI" = "" ]; then + URI=$1 + elif [ "${1:0:6}" = "ssh://" ]; then + UNIT_CTRL=$1 + else + echo "${0##*/}: ERROR: Invalid option ($1)" + exit 1 + fi + shift + ;; + esac +done + +if [ "$URI" = "" ]; then + cat << __EOF__ +${0##*/} - a curl wrapper for managing NGINX Unit configuration + +USAGE: ${0##*/} [options] URI + +• URI is for Unit's control API target, e.g. /config +• A local Unit control socket is detected unless a remote one is specified. +• Configuration data is read from stdin. + +General options + filename … # Read configuration data from files instead of stdin + HTTP method # Default=GET, or PUT with config data (case-insensitive) + INSERT # Virtual HTTP method to prepend data to an existing array + -q | --quiet # No output to stdout + +Local options + -l | --nolog # Do not monitor the error log after applying config changes + +Remote options + ssh://[user@]remote_host[:port]/path/to/control.socket # Remote Unix socket + http://remote_host:port/URI # Remote TCP socket + + A remote Unit control socket may also be defined with the \$UNIT_CTRL + environment variable as http://remote_host:port -OR- ssh://… (as above) + +__EOF__ + exit 1 +fi + +# Figure out if we're running on the Unit host, or remotely +# +if [ "$UNIT_CTRL" = "" ]; then + if [ "${URI:0:4}" = "http" ]; then + REMOTE=1 + UNIT_CTRL=$(echo "$URI" | cut -f1-3 -d/) + URI=/$(echo "$URI" | cut -f4- -d/) + fi +elif [ "${UNIT_CTRL:0:6}" = "ssh://" ]; then + REMOTE=1 + SSH_CMD="ssh $(echo $UNIT_CTRL | cut -f1-3 -d/)" + UNIT_CTRL="--unix-socket /$(echo $UNIT_CTRL | cut -f4- -d/) _" +elif [ "${URI:0:1}" = "/" ]; then + REMOTE=1 +fi + +if [ $REMOTE -eq 0 ]; then + # Check if Unit is running, find the main process + # + PID=($(ps ax | grep unit:\ main | grep -v \ grep | awk '{print $1}')) + if [ ${#PID[@]} -eq 0 ]; then + echo "${0##*/}: ERROR: unitd not running (set \$UNIT_CTRL to configure a remote instance)" + exit 1 + elif [ ${#PID[@]} -gt 1 ]; then + echo "${0##*/}: ERROR: multiple unitd processes detected (${PID[@]})" + exit 1 + fi + + # Read the significant unitd conifuration from cache file (or create it) + # + if [ -r /tmp/${0##*/}.$PID.env ]; then + source /tmp/${0##*/}.$PID.env + else + # Check we have unitd in $PATH (and all the other tools we will need) + # + MISSING=$(hash unitd curl ps grep tr cut sed tail sleep 2>&1 | cut -f4 -d: | tr -d '\n') + if [ "$MISSING" != "" ]; then + echo "${0##*/}: ERROR: cannot find$MISSING: please install or add to \$PATH" + exit 1 + fi + + # Get control address + # + PARAMS=$(ps $PID | grep unitd | cut -f2- -dv | tr '[]' ' ' | cut -f4- -d ' ' | sed -e 's/ --/\n--/g') + CTRL_ADDR=$(echo "$PARAMS" | grep '\--control' | cut -f2 -d' ') + if [ "$CTRL_ADDR" = "" ]; then + CTRL_ADDR=$(unitd --help | grep -A1 '\--control' | tail -1 | cut -f2 -d\") + fi + + # Prepare for network or Unix socket addressing + # + if [ $(echo $CTRL_ADDR | grep -c ^unix:) -eq 1 ]; then + SOCK_FILE=$(echo $CTRL_ADDR | cut -f2- -d:) + if [ -r $SOCK_FILE ]; then + UNIT_CTRL="--unix-socket $SOCK_FILE _" + else + echo "${0##*/}: ERROR: cannot read unitd control socket: $SOCK_FILE" + ls -l $SOCK_FILE + exit 2 + fi + else + UNIT_CTRL="http://$CTRL_ADDR" + fi + + # Get error log filename + # + ERROR_LOG=$(echo "$PARAMS" | grep '\--log' | cut -f2 -d' ') + if [ "$ERROR_LOG" = "" ]; then + ERROR_LOG=$(unitd --help | grep -A1 '\--log' | tail -1 | cut -f2 -d\") + fi + + # Cache the discovery for this unit PID (and cleanup any old files) + # + rm /tmp/${0##*/}.* 2> /dev/null + echo UNIT_CTRL=\"${UNIT_CTRL}\" > /tmp/${0##*/}.$PID.env + echo ERROR_LOG=${ERROR_LOG} >> /tmp/${0##*/}.$PID.env + fi +fi + +# Choose presentation style +# +if [ $QUIET -eq 1 ]; then + OUTPUT="head -c 0" # Equivalent to >/dev/null +elif hash jq 2> /dev/null; then + OUTPUT="jq" +else + OUTPUT="cat" +fi + +# Get current length of error log before we make any changes +# +if [ -f $ERROR_LOG ] && [ -r $ERROR_LOG ]; then + LOG_LEN=$(wc -l < $ERROR_LOG) +else + NOLOG=1 +fi + +# Adjust HTTP method and curl params based on presence of stdin payload +# +if [ -t 0 ] && [ ${#CONF_FILES[@]} -eq 0 ]; then + if [ "$METHOD" = "DELETE" ]; then + $SSH_CMD curl -X $METHOD $UNIT_CTRL$URI 2> /tmp/${0##*/}.$$ | $OUTPUT + else + SHOW_LOG=$(echo $URI | grep -c ^/control/) + $SSH_CMD curl $UNIT_CTRL$URI 2> /tmp/${0##*/}.$$ | $OUTPUT + fi +else + if [ "$METHOD" = "INSERT" ]; then + if ! hash jq 2> /dev/null; then + echo "${0##*/}: ERROR: jq(1) is required to use the INSERT method; install at <https://stedolan.github.io/jq/>" + exit 1 + fi + NEW_ELEMENT=$(cat ${CONF_FILES[@]}) + echo $NEW_ELEMENT | jq > /dev/null || exit $? # Test the input is valid JSON before proceeding + OLD_ARRAY=$($SSH_CMD curl -s $UNIT_CTRL$URI) + if [ "$(echo $OLD_ARRAY | jq -r type)" = "array" ]; then + echo $OLD_ARRAY | jq ". |= [$NEW_ELEMENT] + ." | $SSH_CMD curl -X PUT --data-binary @- $UNIT_CTRL$URI 2> /tmp/${0##*/}.$$ | $OUTPUT + else + echo "${0##*/}: ERROR: the INSERT method expects an array" + exit 3 + fi + else + cat ${CONF_FILES[@]} | $SSH_CMD curl -X $METHOD --data-binary @- $UNIT_CTRL$URI 2> /tmp/${0##*/}.$$ | $OUTPUT + fi +fi + +CURL_STATUS=${PIPESTATUS[0]} +if [ $CURL_STATUS -ne 0 ]; then + echo "${0##*/}: ERROR: curl(1) exited with an error ($CURL_STATUS)" + if [ $CURL_STATUS -eq 7 ] && [ $REMOTE -eq 0 ]; then + echo "${0##*/}: Check that you have permission to access the Unit control socket, or try again with sudo(8)" + else + echo "${0##*/}: Trying to access $UNIT_CTRL$URI" + cat /tmp/${0##*/}.$$ && rm /tmp/${0##*/}.$$ + fi + exit 4 +fi +rm /tmp/${0##*/}.$$ 2> /dev/null + +if [ $SHOW_LOG -gt 0 ] && [ $NOLOG -eq 0 ] && [ $QUIET -eq 0 ]; then + echo -n "${0##*/}: Waiting for log..." + sleep $SHOW_LOG + echo "" + sed -n $((LOG_LEN+1)),\$p $ERROR_LOG +fi |