| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There was a couple of reports of Python applications failing due to the
following type of error
File "/opt/netbox/netbox/netbox/configuration.py", line 25, in _import
print(f"\U0001f9ec loaded config '{path}'")
UnicodeEncodeError: 'ascii' codec can't encode character '\U0001f9ec' in
position 0: ordinal not in range(128)
due to the use of Unicode text in the print() statement.
This only happened for python 3.8+ when using the "home" configuration
option as this meant we were going through the new PyConfig
configuration.
When using this new configuration method with the 'isolated' specific
API (for embedded Python) UTF-8 is disabled by default,
PyPreConfig->utf8_mode = 0.
To fix this we need to setup the Python pre config and enable utf-8
mode. However rather than enable utf-8 unconditionally we can set to it
to -1 so that it will use the LC_CTYPE environment variable to determine
whether to enable utf-8 mode or not. utf-8 mode will be enabled if
LC_CTYPE is either: C, POSIX or some specific UTF-8 locale. This is the
default utf8_mode setting when using the non-isolated PyPreConfig API.
Reported-by: Tobias Genannt <tobias.genannt@kappa-velorum.net>
Tested-by: Tobias Genannt <tobias.genannt@kappa-velorum.net>
Link: <https://peps.python.org/pep-0587/>
Link: <https://docs.python.org/3/c-api/init_config.html#c.PyPreConfig.utf8_mode>
Fixes: 491d0f70 ("Python: Added support for Python 3.11.")
Closes: <https://github.com/nginx/unit/issues/817>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This is a preparatory patch for future work and cleans up the code a
little in the Python 3.8+ variant of nxt_python3_init_config().
The main advantage being we no longer have calls to PyConfig_Clear() in
two different paths.
The variables have a little extra space in their declarations to allow
for the next patch which introduces a variable with a longer type name,
which will help reduce the size of the diff.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
Reported-by: Liam Crilly <liam@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
mktemp(1) in macOS uses a weird directory where only the running user
has permissions. If we use that for the welcome website, unitd(8) won't
be able to read the page. Use a directory at $HOME before trying a tmpdir.
Reported-by: Liam Crilly <lcrilly@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Reported-by: Liam Crilly <lcrilly@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
These directories are used in the Makefile to determine status of a target.
|
|
While at it, fixed changelogs generation for Python 3.10 as well.
|
|
|
|
'sudo' was misplaced.
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
This prevents accidents, which are likely to happen especially with quotes.
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
pkg-config package is named differently on supported rpm-based systems:
- Amazon Linux 2 has pkgconfig
- Fedora has pkgconf-pkg-config
- RHEL 7 has pkgconfig
- RHEL 8 and 9 have pkgconfig-pkg-config
What they share in common is they all provide 'pkgconfig', which we can
use in the spec file so we don't have to specify it per-OS.
|
|
|
|
|
|
|
|
This script combines the old setup-unit (as the repo-config command),
with new functionality, to provide an easy welcome website for
first-time users, and also some more commands that are useful for
administrating a running unitd(8) instance.
Suggested-by: Liam Crilly <liam@nginx.com>
Cc: Konstantin Pavlov <thresh@nginx.com>
Cc: Artem Konev <a.konev@f5.com>
Cc: Timo Start <t.stark@nginx.com>
Cc: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
|
|
This patch gives users the option to set a `"prefix"` attribute
for Python applications, either at the top level or for specific
`"target"`s. If the attribute is present, the value of `"prefix"`
must be a string beginning with `"/"`. If the value of the `"prefix"`
attribute is longer than 1 character and ends in `"/"`, the
trailing `"/"` is stripped.
The purpose of the `"prefix"` attribute is to set the `SCRIPT_NAME`
context value for WSGI applications and the `root_path` context
value for ASGI applications, allowing applications to properly route
requests regardless of the path that the server uses to expose the
application.
The context value is only set if the request's URL path begins with
the value of the `"prefix"` attribute. In all other cases, the
`SCRIPT_NAME` or `root_path` values are not set. In addition, for
WSGI applications, the value of `"prefix"` will be stripped from
the beginning of the request's URL path before it is sent to the
application.
Reviewed-by: Andrei Zeliankou <zelenkov@nginx.com>
Reviewed-by: Artem Konev <artem.konev@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
|
|
Fixes https://github.com/nginx/unit/issues/728
Refs https://github.com/nginx/unit/issues/718
|
|
|
|
|
|
Added tests for the "large_header_buffer_size" and
"large_header_buffers" configuration options.
|
|
This is an extension to the previous commit, which made
large_header_buffer_size a valid configuration setting.
This commit makes a related value, large_header_buffers, a valid
configuration setting.
While large_header_buffer_size effectively limits the maximum size of
any single header (although unit will try to pack multiple headers into
a buffer if they wholly fit).
large_header_buffers limits how many of these 'large' buffers are
available. It makes sense to also allow this to be user set.
large_header_buffers is already set by the configuration system in
nxt_router.c it just isn't set as a valid config option in
nxt_conf_validation.c
With this change users can set this option in their config if required
by the following
"settings": {
"http": {
"large_header_buffers": 8
}
},
It retains its default value of 4 if this is not set.
NOTE: This is being released as undocumented and subject to change as it
exposes internal workings of unit.
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
@JanMikes and @tagur87 on GitHub both reported issues with long URLs
that were exceeding the 8192 byte large_header_buffer_size setting,
which resulted in a HTTP 431 error (Request Header Fields Too Large).
This can be resolved in the code by updating the following line in
src/nxt_router.c::nxt_router_conf_create()
skcf->large_header_buffer_size = 8192;
However, requiring users to modify unit and install custom versions is
less than ideal. We could increase the value, but to what?
This commit takes the option of allowing the user to set this option in
their config by making large_header_buffer_size a valid configuration
setting.
large_header_buffer_size is already set by the configuration system in
nxt_router.c it just isn't set as a valid config option in
nxt_conf_validation.c
With this change users can set this option in their config if required
by the following
"settings": {
"http": {
"large_header_buffer_size": 16384
}
},
It retains its default value of 8192 bytes if this is not set.
With this commit, without the above setting or too low a value, with a
long URL you get a 431 error. With the above setting set to a large
enough value, the request is successful.
NOTE: This setting really determines the maximum size of any single
header _value_. Also, unit will try and place multiple values
into a buffer _if_ they fully fit.
NOTE: This is being released as undocumented and subject to change as it
exposes internal workings of unit.
Closes: <https://github.com/nginx/unit/issues/521>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
Hide expected alerts by default.
Silence succesfull "go build" information.
|
|
This hooks the cgroup support up to the config system so it can actually
be used.
To make use of this in unit a new "cgroup" section has been added to the
isolation configuration.
e.g
"applications": {
"python": {
"type": "python",
"processes": 5,
"path": "/opt/unit/unit-cgroup-test/",
"module": "app",
"isolation": {
"cgroup": {
"path": "app/python"
}
}
}
}
Now there are two ways to specify the path, relative, like the above
(without a leading '/') and absolute (with a leading '/').
In the above case the "python" application is placed into its own cgroup
under CGROUP_ROOT/<main unit process cgroup>/app/python. Whereas if you
specified say
"path": "/unit/app/python"
Then the python application would be placed under
CGROUP_ROOT/unit/app/python
The first option allows you to easily take advantage of any resource
limits that have already been configured for unit.
With the second method (absolute pathname) if you know of an already
existing cgroup where you'd like to place it, you can, e.g
"path": "/system.slice/unit/python"
Where system.slice has already been created by systemd and may already
have some overall system limits applied which would also apply to unit.
Limits apply down the hierarchy and lower groups can't exceed the
previous group limits.
So what does this actually look like? Lets take the unit-calculator
application[0] and have each of its applications placed into their own
cgroup. If we give each application a new section like
"isolation": {
"cgroup": {
"path": "/unit/unit-calculator/add"
}
}
changing the path for each one, we can visualise the result with the
systemd-cgls command, e.g
│ └─session-5.scope (#4561)
│ ├─ 6667 sshd: andrew [priv]
│ ├─ 6684 sshd: andrew@pts/0
│ ├─ 6685 -bash
│ ├─ 12632 unit: main v1.28.0 [/opt/unit/sbin/unitd --control 127.0.0.1:808>
│ ├─ 12634 unit: controller
│ ├─ 12635 unit: router
│ ├─ 13550 systemd-cgls
│ └─ 13551 less
├─unit (#4759)
│ └─unit-calculator (#5037)
│ ├─subtract (#5069)
│ │ ├─ 12650 unit: "subtract" prototype
│ │ └─ 12651 unit: "subtract" application
│ ├─multiply (#5085)
│ │ ├─ 12653 unit: "multiply" prototype
│ │ └─ 12654 unit: "multiply" application
│ ├─divide (#5101)
│ │ ├─ 12671 unit: "divide" prototype
│ │ └─ 12672 node divide.js
│ ├─sqroot (#5117)
│ │ ├─ 12679 unit: "sqroot" prototype
│ │ └─ 12680 /home/andrew/src/unit-calculator/sqroot/sqroot
│ └─add (#5053)
│ ├─ 12648 unit: "add" prototype
│ └─ 12649 unit: "add" application
We used an absolute path so the cgroups will be created relative to the
main cgroupfs mount, e.g /sys/fs/cgroup
We can see that the main unit processes are in the same cgroup as the
shell from where they were started, by default child process are placed
into the same cgroup as the parent.
Then we can see that each application has been placed into its own
cgroup under /sys/fs/cgroup
Taking another example of a simple 5 process python application, with
"isolation": {
"cgroup": {
"path": "app/python"
}
}
Here we have specified a relative path and thus the python application
will be placed below the existing cgroup that contains the main unit
process. E.g
│ │ │ ├─app-glib-cinnamon\x2dcustom\x2dlauncher\x2d3-43951.scope (#90951)
│ │ │ │ ├─ 988 unit: main v1.28.0 [/opt/unit/sbin/unitd --no-daemon]
│ │ │ │ ├─ 990 unit: controller
│ │ │ │ ├─ 991 unit: router
│ │ │ │ ├─ 43951 xterm -bg rgb:20/20/20 -fg white -fa DejaVu Sans Mono
│ │ │ │ ├─ 43956 bash
│ │ │ │ ├─ 58828 sudo -i
│ │ │ │ ├─ 58831 -bash
│ │ │ │ └─app (#107351)
│ │ │ │ └─python (#107367)
│ │ │ │ ├─ 992 unit: "python" prototype
│ │ │ │ ├─ 993 unit: "python" application
│ │ │ │ ├─ 994 unit: "python" application
│ │ │ │ ├─ 995 unit: "python" application
│ │ │ │ ├─ 996 unit: "python" application
│ │ │ │ └─ 997 unit: "python" application
[0]: <https://github.com/lcrilly/unit-calculator>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This commit enables the building of the cgroup code. This is only built
when the cgroupv2 filesystem is found.
If cgroupv2 support is found then
cgroupv2: .................. YES
will be printed by ./configure
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This commit hooks into the cgroup infrastructure added in the previous
commit to create per-application cgroups.
It does this by adding each "prototype process" into its own cgroup,
then each child process inherits its parents cgroup.
If we fail to create a cgroup we simply fail the process. This behaviour
may get enhanced in the future.
This won't actually do anything yet. Subsequent commits will hook this
up to the build and config systems.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Firstly, this is not to be confused with CLONE_NEWCGROUP which unit
already supports and is related to namespaces. To re-cap, namespaces
allow processes to have different views of various parts of the system
such as filesystem mounts, networking, hostname etc.
Whereas cgroup[0] is a Linux kernel facility for collecting a bunch of
processes together to perform some task on the group as a whole, for
example to implement resource limits.
There are two parts to cgroup, the core part of organising processes
into a hierarchy and the controllers which are responsible for enforcing
resource limits etc.
There are currently two versions of the cgroup sub-system, the original
cgroup and a version 2[1] introduced in 3.16 (August 2014) and marked
stable in 4.5 (March 2016).
This commit supports the cgroup V2 API and implements the ability to
place applications into their own cgroup on a per-application basis.
You can put them each into their own cgroup or you can group some
together. The ability to set resource limits can easily be added in
future.
The initial use case of this would be to aid in observability of unit
applications which becomes much easier if you can just monitor them on a
per cgroup basis.
One thing to note about cgroup, is that unlike namespaces which are
controlled via system calls such as clone(2) and unshare(2), cgroups are
setup and controlled through the cgroupfs pseudo-filesystem.
cgroup is Linux only and this support will only be enabled if configure
finds the cgroup2 filesystem mount, e.g
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,seclabel,nsdelegate,memory_recursiveprot)
The cgroups are removed on shutdown or as required on reconfiguration.
This commit just adds the basic infrastructure for using cgroups within
unit. Subsequent commits will wire up this support.
It supports creating cgroups relative to the main cgroup root and also
below the cgroup of the main unit process.
[0]: <https://man7.org/linux/man-pages/man7/cgroups.7.html>
[1]: <https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html>
Cc: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Add simple wrapper functions for fopen(3) and fclose(3) that are
somewhat akin to the nxt_file_open() and nxt_file_close() wrappers that
log errors.
Suggested-by: Alejandro Colomar <alx@nginx.com>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
Andrei reported an issue with building unit when using '-O0' with GCC
producing the following compiler errors
cc -c -pipe -fPIC -fvisibility=hidden -O -W -Wall -Wextra -Wno-unused-parameter -Wwrite-strings -Wmissing-prototypes -Werror -g -O0 -I src -I build \
\
\
-o build/src/nxt_unit.o \
-MMD -MF build/src/nxt_unit.dep -MT build/src/nxt_unit.o \
src/nxt_unit.c
src/nxt_unit.c: In function ‘nxt_unit_log’:
src/nxt_unit.c:6601:9: error: ‘msg’ may be used uninitialized [-Werror=maybe-uninitialized]
6601 | p = nxt_unit_snprint_prefix(p, end, pid, level);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/nxt_unit.c:6682:1: note: by argument 2 of type ‘const char *’ to ‘nxt_unit_snprint_prefix’ declared here
6682 | nxt_unit_snprint_prefix(char *p, const char *end, pid_t pid, int level)
| ^~~~~~~~~~~~~~~~~~~~~~~
src/nxt_unit.c:6582:22: note: ‘msg’ declared here
6582 | char msg[NXT_MAX_ERROR_STR], *p, *end;
| ^~~
src/nxt_unit.c: In function ‘nxt_unit_req_log’:
src/nxt_unit.c:6645:9: error: ‘msg’ may be used uninitialized [-Werror=maybe-uninitialized]
6645 | p = nxt_unit_snprint_prefix(p, end, pid, level);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/nxt_unit.c:6682:1: note: by argument 2 of type ‘const char *’ to ‘nxt_unit_snprint_prefix’ declared here
6682 | nxt_unit_snprint_prefix(char *p, const char *end, pid_t pid, int level)
| ^~~~~~~~~~~~~~~~~~~~~~~
src/nxt_unit.c:6625:35: note: ‘msg’ declared here
6625 | char msg[NXT_MAX_ERROR_STR], *p, *end;
| ^~~
cc1: all warnings being treated as errors
The above was reproduced with
$ ./configure --cc-opt=-O0 && ./configure python && make -j4
This warning doesn't happen on clang (15.0.4) or GCC (8.3) and seems to
have been introduced in GCC 11. The above is from GCC (12.2.1, Fedora
37).
The trigger of this GCC issue is actually part of a commit I introduced
a few months back to constify some function parameters and it seems the
consensus for how to resolve this problem is to simply remove the const
qualifier from the *end parameter to nxt_unit_snprint_prefix().
Reported-by: Andrei Zeliankou <zelenkov@nginx.com>
Link: <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100417>
Link: <https://github.com/samtools/htslib/pull/1285>
Link: <https://gcc.gnu.org/gcc-11/changes.html>
Fixes: 4418f99 ("Constified numerous function parameters.")
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
|
|
|
|
Starting from Node.js v18.6.0 return value from all hooks must have
"shortCircuit: true" option specified. For more information see:
https://github.com/nodejs/node/commit/10bcad5c6e
|
|
Python 3.8 added a new Python initialisation configuration API[0].
Python 3.11 marked the old API as deprecated resulting in the following
compiler warnings which we treat as errors, failing the build
src/python/nxt_python.c: In function ‘nxt_python_start’:
src/python/nxt_python.c:130:13: error: ‘Py_SetProgramName’ is deprecated [-Werror=deprecated-declarations]
130 | Py_SetProgramName(nxt_py_home);
| ^~~~~~~~~~~~~~~~~
In file included from /opt/python-3.11/include/python3.11/Python.h:94,
from src/python/nxt_python.c:7:
/opt/python-3.11/include/python3.11/pylifecycle.h:37:38: note: declared here
37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *);
| ^~~~~~~~~~~~~~~~~
src/python/nxt_python.c:134:13: error: ‘Py_SetPythonHome’ is deprecated [-Werror=deprecated-declarations]
134 | Py_SetPythonHome(nxt_py_home);
| ^~~~~~~~~~~~~~~~
/opt/python-3.11/include/python3.11/pylifecycle.h:40:38: note: declared here
40 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetPythonHome(const wchar_t *);
| ^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
We actually have a few config scenarios: Python < 3, Python >= 3.0 < 3.8
and for Python 3 we have two configs where we select one based on
virtual environment setup.
Factor out the Python 3 config initialisation into its own function. We
actually create two functions, one for Python 3.8+ and one for older
Python 3. We pick the right function to use at build time.
The new API also has error checking (where the old API doesn't) which we
handle.
[0]: https://peps.python.org/pep-0587/
Closes: <https://github.com/nginx/unit/issues/710>
[ Andrew: Expanded upon patch from @sandeep-gh ]
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
|
|
|
