| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
To make fixtures accessible inside of setup methods in tests all these methods
are renamed to the "setup_method_fixture" and decorated by autouse flag.
Also all setup methods moved to the top of the files.
|
|
|
|
If we don't update the pointer before copying the request body, then we
get the behavior shown below. After this patch, "foo\n" is rightly
appended at the end of the response body.
Request:
"GET / HTTP/1.1\r\nHost: _\nContent-Length: 4\n\nfoo\n"
Response body:
"""
Hello world!
foo
est data:
Method: GET
Protocol: HTTP/1.1
Remote addr: 127.0.0.1
Local addr: 127.0.0.1
Target: /
Path: /
Fields:
Host: _
Content-Length: 4
Body:
"""
Fixes: 1bb22d1e922c ("Unit application library.")
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
|
|
|
|
In this case, Andrew always committed under the same name, so it's not
strictly necessary.
This is for consistency, so that it's clearer whose is an email address.
It also makes it easier to sort the names alphabetically.
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
We renamed the options recently, with the intention of keeping the old
names as supported but deprecated for some time, before removal. This
was done with the configure script options, but in the unitd binary, we
accidentally removed the old names, causing some unintended breakage.
Keep support for the old names, albeit with a deprecation message to
stderr, for some time, until we decide to remove them.
Fixes: 5a37171f733f ("Added default values for pathnames.")
Closes: <https://github.com/nginx/unit/issues/876>
Reported-by: El RIDO <elrido@gmx.net>
Acked-by: Liam Crilly <liam@nginx.com>
Acked-by: Artem Konev <a.konev@f5.com>
Acked-by: Timo Stark <t.stark@nginx.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
|
|
|
|
There are a couple of reports on GitHub about issues accessing Python
ASGI based applications over IPv6.
A request over IPv6 would result in an error like
2023/05/13 17:49:12 [alert] 47202#47202 [unit] #10: Python failed to create 'client' pair
2023/05/13 17:49:12 [alert] 47202#47202 [unit] Python failed to call 'loop.call_soon'
ValueError: invalid literal for int() with base 10: 'db8:1:1:1ee7:dead:beef:cafe'
The above error was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/lib64/python3.11/asyncio/base_events.py", line 765, in call_soon
handle = self._call_soon(callback, args, context)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib64/python3.11/asyncio/base_events.py", line 781, in _call_soon
handle = events.Handle(callback, args, self, context)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
SystemError: <class 'asyncio.events.Handle'> returned a result with an exception set
This issue occurred in the nxt_py_asgi_create_ip_address() function
where it tries to create an IP address / port number pair.
It does this by looking for the first ':' in the address and taking
everything after it as the port number. Like in the above error message,
if we tried to access the server @ 2001:db8:1:1:1ee7:dead:beef:cafe,
then we'd end up with the port number as 'db8:1:1:1ee7:dead:beef:cafe'.
There are two issues with this
1) The IP address and port number are already flowed through
separately.
2) Even if (1) wasn't true, it would still be broken for IPv6 as we'd
expect to a get an address literal like
[2001:db8:1:1:1ee7:dead:beef:cafe]:8080, however there was no code to
handle the []'s.
The fix is to simply not try looking for a port number. We pass a port
number into this function to use in the case where we don't find a port
number, we never will...
A further cleanup would be to flow through the server port number when
creating the 'server pair' PyTuple, rather than just using the hard
coded 80.
Closes: <https://github.com/nginx/unit/issues/793>
Closes: <https://github.com/nginx/unit/issues/874>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The entrypoint script now performs a default configuration when no useful
files are found in /docker-entrypoint.d/
The default configuration serves a welcome page in response to all
requests, using Markdown unless text/html is sent in the Accept header.
This provides a useful 'hello world' experience when running a Unit
container for the first time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This commit introduced the basic URI rewrite. It allows users to change request URI. Note the "rewrite" option ignores the contained query if any and the query from the request is preserverd.
An example:
"routes": [
{
"match": {
"uri": "/v1/test"
},
"action": {
"return": 200
}
},
{
"action": {
"rewrite": "/v1$uri",
"pass": "routes"
}
}
]
Reviewed-by: Alejandro Colomar <alx@nginx.com>
|
|
Pp is used to separate paragraphs, not to introduce them. A Pp macro
call right after Sh is wrong, and it is ignored by the formatter, which
reports a warning about it.
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Reviewed-by: Artem Konev <a.konev@f5.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
The Authors section is meant to list the main authors. However, the
section only contained the copyright notice, so the Copyright section
seems more appropriate. While we change that, it makes sense to also
specify the license, and update the copyright year.
Reviewed-by: Liam Crilly <liam@nginx.com>
Reviewed-by: Artem Konev <a.konev@f5.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
We've applied significant changes to the page, so let's update the date.
While we're at it, let's change it to use ISO 8601 format for the date.
Reviewed-by: Artem Konev <a.konev@f5.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Not setting it produces the default value of 'BSD' or 'GNU', depending
on the software formatting the manual page. We're neither, so let's
specify our project name. See groff_mdoc(7). While mandoc_mdoc(7)
formally says that .Os is only for the operating system, and not for the
package name, that's an oversimplification, and only meant for software
inherent to the OS. For portable software, mandoc(1)'s (and OpenBSD's)
maintainer Ingo Schwarze agreed that it is more sensible to specify the
project name (and optionally, the version).
Reviewed-by: Artem Konev <a.konev@f5.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Reviewed-by: Artem Konev <a.konev@f5.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
There was a recent unanimous agreement by maintainers of groff, mandoc,
the Linux man-pages, and other relevant programmers, that manual pages
should not use uppercase unnecessarily. Use of uppercase in the title
and in the section's titles dates from before one could use bold,
italics, and other such formatting, so that it was the way of giving
more importance to certain parts of a page. Nowadays, we use bold, so
uppercase is unnecessary.
Moreover, using uppercase in the title is bad, since it removes
information. If we keep the exact casing used in the program (or
function) name, we provide more information. And anyway, if users want
to read in uppercase, they can program certain mdoc(7) or man(7) macros
to transform their arguments into uppercase. This could be done via
</etc/groff/mdoc.local> and </etc/groff/man.local>.
There's a plan of transforming OpenBSD pages and the Linux man-pages to
stop using uppercase. Other projects may join. That will likely happen
in the following months. Let's align with this.
Reviewed-by: Artem Konev <a.konev@f5.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
This short option is not really supported. Probably it was just a typo.
Reviewed-by: Artem Konev <a.konev@f5.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Reviewed-by: Artem Konev <a.konev@f5.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
|
|
Normally Unit responds to HTTP requests by including a header like
Server: Unit/1.30.0
however it can sometimes be beneficial to withhold the version
information and in this case just respond with
Server: Unit
This patch adds a new "settings.http" boolean option called
server_version, which defaults to true, in which case the full version
information is sent. However this can be set to false, e.g
"settings": {
"http": {
"server_version": false
}
},
in which case Unit responds without the version information as the
latter example above shows.
Link: <https://www.ietf.org/rfc/rfc9110.html#section-10.2.4>
Closes: <https://github.com/nginx/unit/issues/158>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Split out the "Unit" name from the NXT_SERVER #define into its own
NXT_NAME #define, then make NXT_SERVER a combination of that and
NXT_VERSION.
This is required for a subsequent commit where we may want the server
name on its own.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
In nxt_kqueue_poll() error is declared as a nxt_bool_t aka unsigned int
(on x86-64 anyway).
It is used both as a boolean and as the return storage for a bitwise AND
operation.
This has potential to go awry.
If nxt_bool_t was changed to be a u8 then we would have the following
issue
gcc12 -c -pipe -fPIC -fvisibility=hidden -O -W -Wall -Wextra -Wno-unused-parameter -Wwrite-strings -Wmissing-prototypes -Werror -g -O2 -I src -I build -I/usr/local/include -o build/src/nxt_kqueue_engine.o -MMD -MF build/src/nxt_kqueue_engine.dep -MT build/src/nxt_kqueue_engine.o src/nxt_kqueue_engine.c
src/nxt_kqueue_engine.c: In function 'nxt_kqueue_poll':
src/nxt_kqueue_engine.c:728:17: error: overflow in conversion from 'int' to 'nxt_bool_t' {aka 'unsigned char'} changes value from '(int)kev->flags & 16384' to '0' [-Werror=overflow]
728 | error = (kev->flags & EV_ERROR);
| ^
cc1: all warnings being treated as errors
EV_ERROR has the value 16384, after the AND operation error holds 16384,
however this overflows and wraps around (64 times) exactly to 0.
With nxt_bool_t defined as a u32, we would have a similar issue if
EV_ERROR ever became UINT_MAX + 1 (or a multiple thereof)...
Rather than conflating the use of error, keep error as a boolean (it is
used further down the function) but do the AND operation inside the
if ().
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This removes a bunch of unused files that would have been touched by
subsequent commits that switch to using nxt_bool_t (AKA unit6_t) in
structures.
In auto/sources we have
NXT_LIB_SRC0=" \
src/nxt_buf_filter.c \
src/nxt_job_file.c \
src/nxt_stream_module.c \
src/nxt_stream_source.c \
src/nxt_upstream_source.c \
src/nxt_http_source.c \
src/nxt_fastcgi_source.c \
src/nxt_fastcgi_record_parse.c \
\
src/nxt_mem_pool_cleanup.h \
src/nxt_mem_pool_cleanup.c \
"
None of these seem to actually be used anywhere (other than within
themselves). That variable is _not_ referenced anywhere else.
Also remove the unused related header files: src/nxt_buf_filter.h,
src/nxt_fastcgi_source.h, src/nxt_http_source.h, src/nxt_job_file.h,
src/nxt_stream_source.h and src/nxt_upstream_source.h
Also, these files do not seem to be used, no mention under auto/ or build/
src/nxt_file_cache.c
src/nxt_cache.c
src/nxt_job_file_cache.c
src/nxt_cache.h is #included in src/nxt_main.h, but AFAICT is not
actually used.
With all the above removed
$ ./configure --openssl --debug --tests && make -j && make -j tests &&
make libnxt
all builds.
Buildbot passes.
NOTE: You may need to do a 'make clean' before the next build attempt.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Instead of doing the same operation in each subcommand, do it once in
the parent.
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
|
|
Don't reconstruct a new string for the $request_line from the parsed
method, target, and HTTP version, but rather keep a pointer to the
original memory where the request line was received.
This will be necessary for implementing URI rewrites, since we want to
log the original request line, and not one constructed from the
rewritten target.
This implementation changes behavior (only for invalid requests) in the
following way:
Previous behavior was to log as many tokens from the request line as
were parsed validly, thus:
Request -> access log ; error log
"GET / HTTP/1.1" -> "GET / HTTP/1.1" OK ; =
"GET / HTTP/1.1" -> "GET / HTTP/1.1" [1] ; =
"GET / HTTP/2.1" -> "GET / HTTP/2.1" OK ; =
"GET / HTTP/1." -> "GET / HTTP/1." [2] ; "GET / HTTP/1. [null]"
"GET / food" -> "GET / food" [2] ; "GET / food [null]"
"GET / / HTTP/1.1" -> "GET / / HTTP/1.1" [2] ; =
"GET / / HTTP/1.1" -> "GET / / HTTP/1.1" [2] ; =
"GET food HTTP/1.1" -> "GET" ; "GET [null] [null]"
"OPTIONS * HTTP/1.1" -> "OPTIONS" [3] ; "OPTIONS [null] [null]"
"FOOBAR baz HTTP/1.1"-> "FOOBAR" ; "FOOBAR [null] [null]"
"FOOBAR / HTTP/1.1" -> "FOOBAR / HTTP/1.1" ; =
"get / HTTP/1.1" -> "-" ; " [null] [null]"
"" -> "-" ; " [null] [null]"
This behavior was rather inconsistent. We have several options to go
forward with this patch:
- NGINX behavior.
Log the entire request line, up to '\r' | '\n', even if it was
invalid.
This is the most informative alternative. However, RFC-complying
requests will probably not send invalid requests.
This information would be interesting to users where debugging
requests constructed manually via netcat(1) or a similar tool, or
maybe for debugging a client, are important. It might be interesting
to support this in the future if our users are interested; for now,
since this approach requires looping over invalid requests twice,
that's an overhead that we better avoid.
- Previous Unit behavior
This is relatively fast (almost as fast as the next alternative, the
one we chose), but the implementation is ugly, in that we need to
perform the same operation in many places around the code.
If we want performance, probably the next alternative is better; if
we want to be informative, then the first one is better (maybe in
combination with the third one too).
- Chosen behavior
Only logging request lines when the request is valid. For any
invalid request, or even unsupported ones, the request line will be
logged as "-". Thus:
Request -> access log [4]
"GET / HTTP/1.1" -> "GET / HTTP/1.1" OK
"GET / HTTP/1.1" -> "GET / HTTP/1.1" [1]
"GET / HTTP/2.1" -> "-" [3]
"GET / HTTP/1." -> "-"
"GET / food" -> "-"
"GET / / HTTP/1.1" -> "GET / / HTTP/1.1" [2]
"GET / / HTTP/1.1" -> "GET / / HTTP/1.1" [2]
"GET food HTTP/1.1" -> "-"
"OPTIONS * HTTP/1.1" -> "-"
"FOOBAR baz HTTP/1.1"-> "-"
"FOOBAR / HTTP/1.1" -> "FOOBAR / HTTP/1.1"
"get / HTTP/1.1" -> "-"
"" -> "-"
This is less informative than previous behavior, but considering how
inconsistent it was, and that RFC-complying agents will probably not
send us such requests, we're ready to lose that information in the
log. This is of course the fastest and simplest implementation we
can get.
We've chosen to implement this alternative in this patch. Since we
modified the behavior, this patch also changes the affected tests.
[1]: Multiple successive spaces as a token delimiter is allowed by the
RFC, but it is discouraged, and considered a security risk. It is
currently supported by Unit, but we will probably drop support for
it in the future.
[2]: Unit currently supports spaces in the request-target. This is
a violation of the relevant RFC (linked below), and will be fixed
in the future, and consider those targets as invalid, returning
a 400 (Bad Request), and thus the log lines with the previous
inconsistent behavior would be changed.
[3]: Not yet supported.
[4]: In the error log, regarding the "log_routes" conditional logging
of the request line, we only need to log the request line if it
was valid. It doesn't make sense to log "" or "-" in case that
the request was invalid, since this is only useful for
understanding decisions of the router. In this case, the access
log is more appropriate, which shows that the request was invalid,
and a 400 was returned. When the request line is valid, it is
printed in the error log exactly as in the access log.
Link: <https://datatracker.ietf.org/doc/html/rfc9112#section-3>
Suggested-by: Liam Crilly <liam@nginx.com>
Reviewed-by: Zhidao Hong <z.hong@f5.com>
Cc: Timo Stark <t.stark@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Cc: Andrew Clayton <a.clayton@nginx.com>
Cc: Artem Konev <a.konev@f5.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
|
|
Currently when running in the foreground, unit application processes
will send stdout to the current TTY and stderr to the unit log file.
That behaviour won't change.
When running as a daemon, unit application processes will send stdout to
/dev/null and stderr to the unit log file.
This commit allows to alter the latter case of unit running as a daemon,
by allowing applications to redirect stdout and/or stderr to specific
log files. This is done via two new application options, 'stdout' &
'stderr', e.g
"applications": {
"myapp": {
...
"stdout": "/path/to/log/unit/app/stdout.log",
"stderr": "/path/to/log/unit/app/stderr.log"
}
}
These log files are created by the application processes themselves and
thus the log directories need to be writable by the user (and or group)
of the application processes.
E.g
$ sudo mkdir -p /path/to/log/unit/app
$ sudo chown APP_USER /path/to/log/unit/app
These need to be setup before starting unit with the above config.
Currently these log files do not participate in log-file rotation
(SIGUSR1), that may change in a future commit. In the meantime these
logs can be rotated using the traditional copy/truncate method.
NOTE:
You may or may not see stuff printed to stdout as stdout was
traditionally used by CGI applications to communicate with the
webserver.
Closes: <https://github.com/nginx/unit/issues/197>
Closes: <https://github.com/nginx/unit/issues/846>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This is analogous to the nxt_file_stderr() function and will be used in
a subsequent commit.
This function redirects stdout to a given file descriptor.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
