| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This removes a bunch of unused files that would have been touched by
subsequent commits that switch to using nxt_bool_t (AKA unit6_t) in
structures.
In auto/sources we have
NXT_LIB_SRC0=" \
src/nxt_buf_filter.c \
src/nxt_job_file.c \
src/nxt_stream_module.c \
src/nxt_stream_source.c \
src/nxt_upstream_source.c \
src/nxt_http_source.c \
src/nxt_fastcgi_source.c \
src/nxt_fastcgi_record_parse.c \
\
src/nxt_mem_pool_cleanup.h \
src/nxt_mem_pool_cleanup.c \
"
None of these seem to actually be used anywhere (other than within
themselves). That variable is _not_ referenced anywhere else.
Also remove the unused related header files: src/nxt_buf_filter.h,
src/nxt_fastcgi_source.h, src/nxt_http_source.h, src/nxt_job_file.h,
src/nxt_stream_source.h and src/nxt_upstream_source.h
Also, these files do not seem to be used, no mention under auto/ or build/
src/nxt_file_cache.c
src/nxt_cache.c
src/nxt_job_file_cache.c
src/nxt_cache.h is #included in src/nxt_main.h, but AFAICT is not
actually used.
With all the above removed
$ ./configure --openssl --debug --tests && make -j && make -j tests &&
make libnxt
all builds.
Buildbot passes.
NOTE: You may need to do a 'make clean' before the next build attempt.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This makes the build tree more organized, which is good for adding new
stuff. Now, it's useful for example for adding manual pages in man3/,
but it may be useful in the future for example for extending the build
system to run linters (e.g., clang-tidy(1), Clang analyzer, ...) on the
C source code.
Previously, the build tree was quite flat, and looked like this (after
`./configure && make`):
$ tree -I src build
build
├── Makefile
├── autoconf.data
├── autoconf.err
├── echo
├── libnxt.a
├── nxt_auto_config.h
├── nxt_version.h
├── unitd
└── unitd.8
1 directory, 9 files
And after this patch, it looks like this:
$ tree -I src build
build
├── Makefile
├── autoconf.data
├── autoconf.err
├── bin
│ └── echo
├── include
│ ├── nxt_auto_config.h
│ └── nxt_version.h
├── lib
│ ├── libnxt.a
│ └── unit
│ └── modules
├── sbin
│ └── unitd
├── share
│ └── man
│ └── man8
│ └── unitd.8
└── var
├── lib
│ └── unit
├── log
│ └── unit
└── run
└── unit
17 directories, 9 files
It also solves one issue introduced in
5a37171f733f ("Added default values for pathnames."). Before that
commit, it was possible to run unitd from the build system
(`./build/unitd`). Now, since it expects files in a very specific
location, that has been broken. By having a directory structure that
mirrors the installation, it's possible to trick it to believe it's
installed, and run it from there:
$ ./configure --prefix=./build
$ make
$ ./build/sbin/unitd
Fixes: 5a37171f733f ("Added default values for pathnames.")
Reported-by: Liam Crilly <liam@nginx.com>
Reviewed-by: Konstantin Pavlov <thresh@nginx.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Cc: Zhidao Hong <z.hong@f5.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
In BSD systems, it's usually </var/db> or some other dir under </var>
that is not </var/lib>, so $statedir is a more generic name. See
hier(7).
Reported-by: Andrei Zeliankou <zelenkov@nginx.com>
Reported-by: Zhidao Hong <z.hong@f5.com>
Reviewed-by: Konstantin Pavlov <thresh@nginx.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Cc: Liam Crilly <liam@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
This prctl(2) option can be used to set the "child subreaper" attribute
of the calling process. This allows a process to take on the role of
'init', which means the process will inherit descendant processes when
their immediate parent terminates.
This will be used in an upcoming commit that uses a double fork(2) +
unshare(2) to create a new PID namespace. The parent from the second
fork will terminate leaving the child process to be inherited by 'init'.
Aside from it being better to maintain the parent/child relationships
between the various unit processes, without setting this you need to ^C
twice to fully quit unit when running in the foreground after the double
fork.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Due to the need to replace our use of clone/__NR_clone on Linux with
fork(2)/unshare(2) for enabling Linux namespaces(7) to keep the
pthreads(7) API working. Let's rename NXT_HAVE_CLONE to
NXT_HAVE_LINUX_NS, i.e name it after the feature, not how it's
implemented, then in future if we change how we do namespaces again we
don't have to rename this.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This prctl(2) option is checked for in auto/isolation, unfortunately due
to a typo this feature has never been enabled.
In the auto/isolation script the feature name was down as
NXT_HAVE_PR_SET_NO_NEW_PRIVS0, which means we end up with the following
in build/nxt_auto_config.h
#ifndef NXT_HAVE_PR_SET_NO_NEW_PRIVS0
#define NXT_HAVE_PR_SET_NO_NEW_PRIVS0 1
#endif
Whereas everywhere else is checking for NXT_HAVE_PR_SET_NO_NEW_PRIVS.
This also guards the inclusion of sys/prctl.h in src/nxt_process.c which
is required by a subsequent commit.
Fixes: e2b53e1 ("Added "rootfs" feature.")
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This allows one to simply run `./configure` and expect it to
produce sane defaults for an install.
Previously, without specifying `--prefix=...`, `make install`
would simply fail, recommending to set `--prefix` or `DESTDIR`,
but that recommendation was incomplete at best, since it didn't
set many of the subdirs needed for a good organization.
Setting `DESTDIR` was even worse, since that shouldn't even affect
an installation (it is required to be transparent to the
installation).
/usr/local is the historic Unix standard path to use for
installations from source made manually by the admin of the
system. Some package managers (Homebrew, I'm looking specifically
at you) have abused that path to install their things, but 1) it's
not our fault that someone else incorrectly abuses that path (and
they seem to be fixing it for newer archs; e.g., they started
using /opt/homebrew for Apple Silicon), 2) there's no better path
than /usr/local, 3) we still allow changing it for systems where
this might not be the desired path (MacOS Intel with hombrew), and
4) it's _the standard_.
See a related conversation with Ingo (OpenBSD maintainer):
On 7/27/22 16:16, Ingo Schwarze wrote:
> Hi Alejandro,
[...]
>
> Alejandro Colomar wrote on Sun, Jul 24, 2022 at 07:07:18PM +0200:
>> On 7/24/22 16:57, Ingo Schwarze wrote:
>>> Alejandro Colomar wrote on Sun, Jul 24, 2022 at 01:20:46PM +0200:
>
>>>> /usr/local is for sysadmins to build from source;
>
>>> Doing that is *very* strongly discouraged on OpenBSD.
>
>> I guess that's why the directory was reused in the BSDs to install ports
>> (probably ports were installed by the sysadmin there, and by extension,
>> ports are now always installed there, but that's just a guess).
>
> Maybe. In any case, the practice of using /usr/local for packages
> created from ports is significantly older than the recommendation
> to refrain from using upstream "make install" outside the ports
> framework.
>
> * The FreeBSD ports framework was started by Jordan Hubbard in 1993.
> * The ports framework was ported from FreeBSD to OpenBSD
> by Niklas Hallqvist in 1996.
> * NetBSD pkgsrc was forked from FreeBSD ports by Alistair G. Crooks
> and Hubert Feyrer in 1997.
>
> I failed to quickly find Jordan's original version, but rev. 1.1
> of /usr/ports/infrastructure/mk/bsd.port.mk in OpenBSD (dated Jun 3
> 22:47:10 1996 UTC) already said
>
> LOCALBASE ?= /usr/local
> PREFIX ?= ${LOCALBASE}
>
[...]
>> I had a discussion in NGINX Unit about it, and
>> the decission for now has been: "support prefix=/usr/local for default
>> manual installation through the Makefile, and let BSD users adjust to
>> their preferred path".
>
> That's an *excellent* solution for the task, thanks for doing it
> the right way. By setting PREFIX=/usr/local by default in the
> upstream Makefile, you are minimizing the work for *BSD porters.
>
> The BSD ports frameworks will typically run the upstreak "make install"
> with the variable DESTDIR set to a custom value, for example
>
> DESTDIR=/usr/ports/pobj/groff-1.23.0/fake-amd64
>
> so if the upstream Makefile sets PREFIX=/usr/local ,
> that's perfect, everything gets installed to the right place
> without an intervention by the person doing the porting.
>
> Of course, if the upstream Makefile would use some other PREFIX,
> that would not be a huge obstacle. All we have to do in that case
> is pass the option --prefix=/usr/local to the ./configure script,
> or something equivalent if the software isn't using GNU configure.
>
>> We were concerned that we might get collisions
>> with the BSD port also installing in /usr/local, but that's the least
>> evil (and considering BSD users don't typically run `make install`, it's
>> not so bad).
>
> It's not bad at all. It's perfect.
>
> Of course, if a user wants to install *without* the ports framework,
> they have to provide their own --prefix. But that's not an issue
> because it is easy to do, and installing without a port is discouraged
> anyway.
===
Directory variables should never contain a trailing slash (I've
learned that the hard way, where some things would break
unexpectedly). Especially, make(1) is likely to have problems
when things have double slashes or a trailing slash, since it
treats filenames as text strings. I've removed the trailing slash
from the prefix, and added it to the derivate variables just after
the prefix. pkg-config(1) also expects directory variables to have
no trailing slash.
===
I also removed the code that would set variables as depending on
the prefix if they didn't start with a slash, because that is a
rather non-obvious behavior, and things should not always depend
on prefix, but other dirs such as $(runstatedir), so if we keep
a similar behavior it would be very unreliable. Better keep
variables intact if set, or use the default if unset.
===
Print the real defaults for ./configure --help, rather than the actual
values.
===
I used a subdirectory under the standard /var/lib for NXT_STATE,
instead of a homemade "state" dir that does the same thing.
===
Modified the Makefile to create some dirs that weren't being
created, and also remove those that weren't being removed in
uninstall, probably because someone forgot to add them.
===
Add new options for setting the new variables, and rename some to be
consistent with the standard names. Keep the old ones at configuration
time for compatibility, but mark them as deprecated. Don't keep the old
ones at exec time.
===
A summary of the default config is:
Unit configuration summary:
bin directory: ............. "/usr/local/bin"
sbin directory: ............ "/usr/local/sbin"
lib directory: ............. "/usr/local/lib"
include directory: ......... "/usr/local/include"
man pages directory: ....... "/usr/local/share/man"
modules directory: ......... "/usr/local/lib/unit/modules"
state directory: ........... "/usr/local/var/lib/unit"
tmp directory: ............. "/tmp"
pid file: .................. "/usr/local/var/run/unit/unit.pid"
log file: .................. "/usr/local/var/log/unit/unit.log"
control API socket: ........ "unix:/usr/local/var/run/unit/control.unit.sock"
Link: <https://www.gnu.org/prep/standards/html_node/Directory-Variables.html>
Link: <https://refspecs.linuxfoundation.org/FHS_3.0/fhs/index.html>
Reviewed-by: Artem Konev <a.konev@f5.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Tested-by: Andrew Clayton <a.clayton@nginx.com>
Reviewed-by: Konstantin Pavlov <thresh@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
In configure we set NXT_HAVE_LITTLE_ENDIAN for i386, amd64 and x86_64.
However that misses at least AArch64 (arm64) where it's usually run in
little endian mode.
However none of that really matters as NXT_HAVE_LITTLE_ENDIAN isn't used
anywhere. So why this patch?
The only place we need to explicitly know about endianness is the
nxt_websocket_header_t structure where we lay it out differently
depending on endianness.
This is currently done using BYTE_ORDER, LITTLE_ENDIAN and BIG_ENDIAN
macros.
However on at least illumos (OpenSolaris / OpenIndiana) those macros are
not defined and we get compiler errors due to duplicate structure
members.
So let's use our own NXT_HAVE_{BIG,LITTLE}_ENDIAN macros. However it
would be better to detect endianness programmatically as some
architectures can run in either mode, e.g Linux used to run in big
endian on PowerPC but has since switched to little endian (to match
x86).
This commit adds an auto/endian script (using a slightly modified
version of the test program from nginx's auto script), that checks for
the endianness of the platform being built on. E.g
checking for endianness ... little endian
The next commit will switch the nxt_websocket_header_t structure over to
these new macros.
Link: <https://github.com/nginx/unit/pull/298>
Link: <https://developer.ibm.com/articles/l-power-little-endian-faq-trs/>
Tested-by: Alejandro Colomar <alx@nginx.com>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
This commit enables the building of the cgroup code. This is only built
when the cgroupv2 filesystem is found.
If cgroupv2 support is found then
cgroupv2: .................. YES
will be printed by ./configure
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
|
|
|
|
It's for the introduction of njs support.
For each option that supports native variable and JS template literals introduced next,
it's unified as template string.
No functional changes.
|
|
This fixes an issue addressed in 651f5a37f5b8 on FreeBSD 12.
The problem manifested itself as:
configuring Ruby module
checking for -fdeclspec ... found
checking for Ruby library ... not found
checking for Ruby library in /usr/local/lib ... not found
./configure: error: no Ruby found.
|
|
Future releases of GCC are planning to remove[0] default support for
some old features that were removed from C99 but GCC still accepts.
We can test for these changes by using the following -Werror=
directives
-Werror=implicit-int
-Werror=implicit-function-declaration
-Werror=int-conversion
-Werror=strict-prototypes
-Werror=old-style-definition
Doing so revealed an issue with the auto/ tests in that the test
programs always define main as
int main()
rather than
int main(void)
which results in a bunch of errors like
build/autotest.c:3:23: error: function declaration isn't a prototype [-Werror=strict-prototypes]
3 | int main() {
| ^~~~
build/autotest.c: In function 'main':
build/autotest.c:3:23: error: old-style function definition [-Werror=old-style-definition]
The fix was easy, it only required fixing the main prototype with
find -type f -exec sed -i 's/int main() {/int main(void) {/g' {} \;
Regardless of these upcoming GCC changes, this is probably a good thing
to do anyway for correctness.
[0]: https://fedoraproject.org/wiki/Changes/PortingToModernC
Link: <https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/message/CJXKTLXJUPZ4F2C2VQOTNMEA5JAUPMBD/>
Link: <https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/message/6SGHPHPAXKCVJ6PUZ57WVDQ5TDBVIRMF/>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
'install -d' has an issue compared to 'mkdir -p': it doesn't
respect existing directories. It will set the ownership, file
mode, and SELinux contexts (and any other property that would be
set by install(1) to a newly-created directory), overwriting any
existing properties of the existing directory.
'mkdir -p' doesn't have this issue: it is a no-op if the
directory exists. However, it's not an ideal solution either,
since it can't be used to set the properties (owner, mode, ...) of
a newly-created directory.
Therefore, the best solution is to use install(1), but only after
making sure that the directory doesn't exist with test(1).
Reported-by: Andrew Clayton <a.clayton@nginx.com>
Reported-by: Alejandro Colomar <alx@nginx.com>
Closes: <https://github.com/nginx/unit/issues/769>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
Tested-by: Andrew Clayton <a.clayton@nginx.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
PHP 8.2 changed the prototype of the function, removing the last
parameter.
Signed-off-by: Remi Collet <remi@remirepo.net>
Cc: Timo Stark <t.stark@nginx.com>
Cc: George Peter Banyard <girgias@php.net>
Tested-by: Andy Postnikov <apostnikov@gmail.com>
Acked-by: Andy Postnikov <apostnikov@gmail.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
@alejandro-colomar reported that the build was broken on MacOS
cc -o build/unitd -pipe -fPIC -fvisibility=hidden -O -W -Wall -Wextra -Wno-unused-parameter -Wwrite-strings -fstrict-aliasing -Wstrict-overflow=5 -Wmissing-prototypes -Werror -g \
build/src/nxt_main.o build/libnxt.a \
\
\
-L/usr/local/Cellar/pcre2/10.40/lib -lpcre2-8
Undefined symbols for architecture x86_64:
"_nxt_fs_mkdir_parent", referenced from:
_nxt_runtime_pid_file_create in libnxt.a(nxt_runtime.o)
_nxt_runtime_controller_socket in libnxt.a(nxt_controller.o)
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [build/unitd] Error 1
This was due to commit 57fc920 ("Socket: Created control socket & pid file
directories.").
This happened because this commit introduced the usage of
nxt_fs_mkdir_parent() in core code which uses nxt_fs_mkdir(), both of
these are defined in src/nxt_fs.c. It turns out however that this file
doesn't get built on MacOS (or any system that isn't Linux or that
lacks a FreeBSD compatible nmount(2) system call) due to the following
In auto/sources we have
if [ $NXT_HAVE_ROOTFS = YES ]; then
NXT_LIB_SRCS="$NXT_LIB_SRCS src/nxt_fs.c"
fi
NXT_HAVE_ROOTFS is set in auto/isolation
If [ $NXT_HAVE_MOUNT = YES -a $NXT_HAVE_UNMOUNT = YES ]; then
NXT_HAVE_ROOTFS=YES
cat << END >> $NXT_AUTO_CONFIG_H
#ifndef NXT_HAVE_ISOLATION_ROOTFS
#define NXT_HAVE_ISOLATION_ROOTFS 1
#endif
END
fi
While we do have a check for a generic umount(2) which is found on
MacOS, for mount(2) we currently only check for the Linux mount(2) and
FreeBSD nmount(2) system calls. So NXT_HAVE_ROOTFS is set to NO on MacOS
and we don't build src/nxt_fs.c
This fixes the immediate build issue by taking the mount/umount OS
support out of nxt_fs.c into a new nxt_fs_mount.c file which is guarded
by the above while we now build nxt_fs.c unconditionally.
This should fix the build on any _supported_ system.
Reported-by: Alejandro Colomar <alx@nginx.com>
Fixes: 57fc920 ("Socket: Created control socket & pid file directories.")
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
nxt_sockaddr_ntop() stopped being used in commit (git) 029942f4eb71.
It has been replaced mostly by nxt_sockaddr_text().
commit 029942f4eb7196c2cff0d0e26bc6ff274138f7d8
Author: Igor Sysoev <igor@sysoev.ru>
Date: Wed Feb 22 15:09:59 2017 +0300
I/O operations refactoring.
nxt_job_sockaddr_parse() stopped being used in commit (git) 794248090a74.
commit 794248090a74f31cbfcf24ea8c835df2d4d21073
Author: Igor Sysoev <igor@sysoev.ru>
Date: Wed Mar 4 14:04:08 2020 +0300
Legacy upstream code removed.
Also, remove functions and types used only by those two functions:
nxt_job_sockaddr_unix_parse()
nxt_job_sockaddr_inet6_parse()
nxt_job_sockaddr_inet_parse()
nxt_job_sockaddr_parse_t
nxt_job_resolve()
nxt_job_resolve_t
|
|
Some non-Linux systems implement pivot_root(2), even if they
don't document that. An example is MacOS:
$ grepc pivot_root / 2>/dev/null
.../sys/sysproto.h:3012:
int pivot_root(struct proc *, struct pivot_root_args *, int *);
Since the prototype of the syscall differs from that of Linux, we
can't use that syscall. Let's make sure the test only detects
pivot_root(2) under Linux. Also, rename the feature macro to make
clear that it's only about Linux's pivot_root(2).
This closes #737 issue on GitHub.
|
|
With NXT_HAVE_PIVOT_ROOT, we had issues in MacOS. Headers should
normally be included unconditionally, except of course if they
don't exist.
This fixes part of the #737 issue on GitHub.
|
|
No functional changes.
|
|
User-space programs should use the SYS_*form, as documented in
syscall(2). That also adds compatibility to non-Linux systems.
|
|
Some OSes, as Linux, provide FIONBIO in <sys/ioctl.h>. Others,
such as the BSDs and Illumos, provide it in <sys/filio.h>, but
they all include that header from <sys/ioctl.h>, so for this test,
we can simplify and just include <sys/ioctl.h>.
|
|
posix_spawn(3POSIX) was introduced by POSIX.1d
(IEEE Std 1003.1d-1999), and was later consolidated in
POSIX.1-2001, requiring it in all POSIX-compliant systems.
It's safe to assume it's always available, more than 20 years
after its standardization.
Link: <https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/spawn.h.html>
|
|
Add -fdeclspec to NXT_RUBY_CFLAGS for Clang, if it's available.
Clang incorrectly reports 1 for __has_declspec_attribute(x) in
some cases, such as MacOS or Cygwin. That causes ruby code to
break. ruby added -fdeclspec to their CFLAGS in 2019 to
workaround this bug, since it enables __declspec() and therefore,
the compiler behavior matches what it reports.
Since we don't know what are all the architectures that trigger
the clang bug, let's add the flag for all of them (especially
since it should be harmless).
Add this workaround only at the time of configuring the ruby
module. This way we don't clutter the global NXT_CFLAGS with an
unnecessary flag.
Link: unit bug <https://github.com/nginx/unit/issues/653>
Link: ruby bug <https://bugs.ruby-lang.org/issues/18616>
Link: LLVM bug <https://github.com/llvm/llvm-project/issues/49958>
Commit: LLVM: Add -fdeclspec <d170c4b57a91adc74ca89c6d4af616a00323b12c>
Commit: ruby: Use -fdeclspec <0958e19ffb047781fe1506760c7cbd8d7fe74e57>
|
|
When testing some configurations of compilers and OSes, I noticed
that clang(1) 13 on Debian caused a function to be compiled but
unused, and the compiler triggered a compile error.
To avoid that error, use __attribute__((__unused__)). Let's call
our wrapper NXT_MAYBE_UNUSED, since it describes itself more
precisely than the GCC attribute name. It's also the name that
C2x (likely C23) has given to the standard attribute, which is
[[maybe_unused]], so it's also likely to be more readable because
of that name being in ISO C.
|
|
|
|
|
|
DragonFly BSD supports SCM_CREDS and SCM_RIGHTS, but only the first control
message is passed correctly while the second one isn't processed by the kernel.
This closes #599 issue on GitHub.
|
|
|
|
Compared to the previous implementation based on OpenSSL, the new implementation
has these advantages:
1. Strict and reliable detection of invalid strings, including strings with
less than 4 bytes of garbage at the end;
2. Allows to use Base64 strings without '=' padding.
|
|
|
|
|
|
|
|
The patch removes the "files" section from package.json to avoid future issues
with missing files. For package testing purposes, 'npm pack' is used instead
of plain 'tar' to simulate packaging more accurately.
|
|
To perform various configuration operations on SSL_CTX, OpenSSL provides
SSL_CONF_cmd(). Specifically, to configure ciphers for a listener,
"CipherString" and "Ciphersuites" file commands are used:
https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html
This feature can be configured in the "tls/conf_commands" section.
|
|
In Go 1.16, the module-aware mode is enabled by default; to fall back to
previous behavior, the GO111MODULE environment variable should be set to
'auto'.
Details: https://golang.org/doc/go1.16
|
|
Support for chrooting, rejecting symlinks, and rejecting crossing mounting
points on a per-request basis during static file serving.
|
|
Found by rpmlint.
|
|
This makes the "sed" instruction simpler and more portable, as the previous
variant didn't work well on BSD systems due to the "\s" metacharacter.
Thanks to Sergey A. Osokin <osa@FreeBSD.org.ru> for spotting this issue.
Also, this should prevent accidentally creating a version 1.0.0 package.
|
|
Globally installed modules require a globally installed libunit.
The "binding_pub.gyp" file is the correct version, otherwise linked module
may have unresolved symbols because libunit is not linked.
|
|
|
|
|
|
|
|
Debug logging depends on macros defined in nxt_auto_config.h.
|
|
Thanks to @wujjpp.
This closes #490 PR on GitHub.
|
