| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
|
|
This commit introduces the replacement of the client address based on the value
of a specified HTTP header. This is intended for use when Unit is placed
behind a reverse proxy like nginx or a CDN.
You must specify the source addresses of the trusted proxies. This can be
accomplished with any valid IP pattern supported by Unit's match block:
["10.0.0.1", "10.4.0.0/16", "!192.168.1.1"]
The feature is configured per listener.
The client address replacement functionality only operates when there is a
source IP match and the specified header is present. Typically this would be
an 'X-Forwarded-For' header.
{
"listeners": {
"127.0.0.1:8080": {
"client_ip": {
"header": "X-Forwarded-For",
"source": [
"10.0.0.0/8"
]
},
"pass": "applications/my_app"
},
}
}
If a request occurs and Unit receives a header like below:
"X-Forwarded-For: 84.123.23.23"
By default, Unit trusts the last rightmost IP in the header, so REMOTE_ADDR
will be set to 84.123.23.23 if the connection originated from 10.0.0.0/8.
If Unit runs behind consecutive reverse proxies and receives a header similar
to the following:
"X-Forwarded-For: 84.123.23.23, 10.0.0.254"
You will need to enable "recursive" checking, which walks the header from
last address to first and chooses the first non-trusted address it finds.
{
"listeners": {
"127.0.0.1:8080": {
"client_ip": {
"header": "X-Forwarded-For",
"source": [
"10.0.0.0/8"
]
"recursive": true,
},
"pass": "applications/my_app"
},
}
}
If a connection from 10.0.0.0/8 occurs, the chain is walked. Here, 10.0.0.254
is also a trusted address so the client address will be replaced with
84.123.23.23.
If all IP addresses in the header are trusted, the client address is set to
the first address in the header:
If 10.0.0.0/8 is trusted and "X-Forwarded-For: 10.0.0.3, 10.0.0.2, 10.0.0.1",
the client address will be replaced with 10.0.0.3.
|
|
A crash would occur when the router tried to match an
against an empty address pattern array.
The following configuration was used to reproduce the
issue:
{
"listeners": {
"127.0.0.1:8082": {
"pass": "routes"
}
},
"routes": [
{
"match": {
"source": []
},
"action": {
"return": 200
}
}
]
}
|
|
|
|
When processing a restart request, the router sends a QUIT message to all
existing processes of the application. Then, a new shared application port is
created to ensure that new requests won't be handled by the old processes of
the application.
|
|
When a client sends no SNI is a common situation. But currently the server
processes it as an error and returns SSL_TLSEXT_ERR_ALERT_FATAL causing
termination of a current TLS session. The problem occurs if configuration has
more than one certificate bundle in a listener.
This fix changes the return code to SSL_TLSEXT_ERR_OK and the log level of a
message.
|
|
To support TLS sessions, Unit uses the OpenSSL built-in session cache; the
cache_size option defines the number sessions to store. To disable the feather,
the option must be zero.
|
|
The receive() call never blocks for a GET request and always returns the same
empty body message. The Starlette framework creates a separate task when
receive() is called in a loop until an 'http.disconnect' message is received.
The 'http.disconnect' message was previously issued after the response header
had been sent. However, the correct behavior is to respond with
'http.disconnect' after sending the response is complete.
This closes #564 issue on GitHub.
|
|
A new application thread port message can be processed in the router after the
application is removed from the router. Assertion for this case is replaced by
a condition to store the new thread port until receiving the stop notification
from the application process.
|
|
This feature allows one to specify blocks of code that are called when certain
lifecycle events occur. A user configures a "hooks" property on the app
configuration that points to a script. This script will be evaluated on boot
and should contain blocks of code that will be called on specific events.
An example of configuration:
{
"type": "ruby",
"processes": 2,
"threads": 2,
"user": "vagrant",
"group": "vagrant",
"script": "config.ru",
"hooks": "hooks.rb",
"working_directory": "/home/vagrant/unit/rbhooks",
"environment": {
"GEM_HOME": "/home/vagrant/.ruby"
}
}
An example of a valid "hooks.rb" file follows:
File.write("./hooks.#{Process.pid}", "hooks evaluated")
on_worker_boot do
File.write("./worker_boot.#{Process.pid}", "worker booted")
end
on_thread_boot do
File.write("./thread_boot.#{Process.pid}.#{Thread.current.object_id}",
"thread booted")
end
on_thread_shutdown do
File.write("./thread_shutdown.#{Process.pid}.#{Thread.current.object_id}",
"thread shutdown")
end
on_worker_shutdown do
File.write("./worker_shutdown.#{Process.pid}", "worker shutdown")
end
This closes issue #535 on GitHub.
|
|
When the textual representation of an IPv6 nxt_sockaddr_t was being
generated, a crash would occur if the address had a full IPv6 form:
f607:7403:1e4b:6c66:33b2:843f:2517:da27
This was caused by a variable that tracks the location of a
collapsed group ("::") that was not set to a sane default. When
the address was generated, a group would be inserted when
it was not necessary, thus causing an overflow.
This closes #481 issue on GitHub.
|
|
In rare cases, when the destination process had finished running but no
notification of this was received yet, send could fail with an error, and the
send message structure with file descriptors could leak.
The leakage was periodically reproduced by respawn tests on FreeBSD 12.
|
|
Because of the incorrect 'last' field assignment, multiple listeners with
a TLS certificate did not initialize properly, which caused a router crash
while establishing a connection.
Test with multiple TLS listeners added.
The issue was introduced in the c548e46fe516 commit.
This closes #561 issue on GitHub.
|
|
|
|
|
|
|
|
|
|
|
|
To perform various configuration operations on SSL_CTX, OpenSSL provides
SSL_CONF_cmd(). Specifically, to configure ciphers for a listener,
"CipherString" and "Ciphersuites" file commands are used:
https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html
This feature can be configured in the "tls/conf_commands" section.
|
|
A crash was caused by an incorrect timer handler nxt_h1p_idle_timeout() if
SSL_shutdown() returned SSL_ERROR_WANT_READ/SSL_ERROR_WANT_WRITE.
The flag SSL_RECEIVED_SHUTDOWN is used to avoid getting SSL_ERROR_WANT_READ, so
the server won't wait for a close notification from a client.
For SSL_ERROR_WANT_WRITE, a correct timer handler is set up.
|
|
|
|
|
|
|
|
Ruby 3.0 deprecated rb_cData with the intention to remove it in release 3.1.
This commit changes references of rb_cData to rb_cObject. This was done so we
can support distributions that package Ruby 3.0, such as Fedora 34.
We also need to call rb_undef_alloc_func because we're no longer deriving from
rb_cData. This prevents unnecessary allocations.
See:
https://docs.ruby-lang.org/en/3.0.0/doc/extension_rdoc.html
"It is recommended that klass derives from a special class called Data
(rb_cData) but not from Object or other ordinal classes. If it doesn't,
you have to call rb_undef_alloc_func(klass)."
|
|
Also added stubs for Server.address()
This was done to prevent crashes in some popular frameworks like express
Supports both CommonJS and the new ES Modules system syntax e.g:
app.js:
const http = require('http')
app.mjs:
import http from "http"
Usage on Node 14.16.x and higher:
{
"type": "external",
"processes": {"spare": 0},
"working_directory": '/project',
"executable": "/usr/bin/env",
"arguments": [
"node",
"--loader",
"unit-http/require_shim.mjs"
"--require",
"unit-http/require_shim",
"app.js"
]
}
Usage on Node 14.15.x and lower:
{
"type": "external",
"processes": {"spare": 0},
"working_directory": '/project',
"executable": "/usr/bin/env",
"arguments": [
"node",
"--require",
"unit-http/require_shim",
"app.js"
]
}
|
|
The "auto_globals_jit" PHP option postponed the initialization of the $_SERVER
global variable until the script using it had been loaded (e. g. via the
"include" expression). As a result, nxt_php_register_variables() could be
called after fastcgi_finish_request() had finished the request and nulled
ctx->req, which thus caused a segmentation fault.
|
|
|
|
Support for chrooting, rejecting symlinks, and rejecting crossing mounting
points on a per-request basis during static file serving.
|
|
|
|
|
|
|
|
When the shm buffer is sent over the port queue, it needs to be completed
because it's sent over the port socket.
|
|
The certificate is selected by matching the arriving SNI to the common name and
the alternatives names. If no certificate matches the name, the first bundle in
the array is chosen.
|
|
|
|
|
|
Reviewed at https://rb.nginx.com/r/165/
|
|
The idea is to put SAN after CN, but the previous version of the code
incorrectly assumed that CN was always present, which caused writes
outside the allocated object if there were no standard name attributes.
|
|
Previously, entries of any type were counted during object allocation
but only DNS type entries were actually processed. As a result,
if some certificate entries had another type, returning information
about the certificate caused uninitialized memory access.
|
|
This closes #525 issue on GitHub.
|
|
The Ruby interpreter expects an explicit setlocale() call before initialization
to pick up character encodings in the "Encoding" class from the environment.
This closes #531 issue on GitHub.
|
|
It appears that readdir() on Linux detects file types unreliably, always setting
the "d_type" field to DT_UNKNOWN for some less common filesystems. As a result,
all files were skipped and no certificate bundles were found when the state
directory was located on such filesystems.
Skipping "." and ".." instead of any non-regular files should be enough, as no
other non-regular files normally appear in this directory.
This closes #368 issue on GitHub.
|
|
An immediate return statement on connection errors was mistakenly added to the
beginning of nxt_openssl_conn_io_shutdown() in ecd3c5bbf7d8, breaking the TLS
connection finalization procedure. As a result, a TLS connection was left
unfinalized if it had been closed prematurely or a fatal protocol error had
occurred, which caused memory and socket descriptor leakage.
Moreover, in some cases (notably, on handshake errors in tests with kqueue on
macOS) the read event was triggered later and nxt_h1p_conn_error() was called
the second time; after the change in af93c866b4f0, the latter call crashed the
router process in an attempt to remove a connection from the idle queue twice.
|
|
This fixes file descriptor leakage in router. Shared memory file used to
send data from router to application. These files are shared among all
processes of same application and router keeps the opened file descriptor since
06017e6e3a5f commit.
|
|
|
|
|
|
|
|
|
|
|
