| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previously the PHP module would produce one of four status codes
200 OK
301 Moved Permanently
500 Internal Server Error
503 Service Unavailable
200 for successful requests, 301 for cases where the url was a directory
without a trailing '/', 500 for bad PHP or non-existing PHP file and 503
for all other errors.
With this commit we now handle missing files and directories, returning
404 Not Found and files and directories that don't allow access,
returning 403 Forbidden.
We do these checks in two places, when we check if we should do a
directory redirect (bar -> bar/) and in the nxt_php_execute() function.
One snag with the latter is that the php_execute_script() function only
returns success/failure (no reason). However while it took a
zend_file_handle structure with the filename of the script to run, we
can instead pass through an already opened file-pointer (FILE *) via
that structure. So we can try opening the script ourselves and do the
required checks before calling php_execute_script().
We also make use of the zend_stream_init_fp() function that initialises
the zend_file_handle structure if it's available otherwise we use our
own version. This is good because the zend_file_handle structure has
changed over time and the zend_stream_init_fp() function should change
with it.
Closes: <https://github.com/nginx/unit/issues/767>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Create a const char *filename variable to hold
ctx->script_filename.start, which is a much more manageable name and
will negate the need for any more casting in the following commit when
we switch to using a FILE * instead of a filename in
php_execute_script().
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Where possible make use of the zend_stream_init_filename() function
introduced in PHP 7.4.
This is essentially a preparatory patch for switching to using an
already opened file-pointer in nxt_php_execute(). While wrapping this
new code in a PHP version check with a fallback to our own function is
perhaps slightly overkill, it does reduce the diff of the commit that
switches to a FILE *.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
We're going to use zend_stream_init_filename in a following commit. To
reduce the diff of that change, move the current code that will be
replaced, to a function that has the same interface.
We use strlen(3) here to be able to use an interface without passing the
length, but we will remove that call in a following code, so it has no
performance issues.
Co-developed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This commit is to loop through the request objects headers,
arguments, and cookies.
|
|
@dward on GitHub reported an issue with a URL like
http://foo.bar/test.php?blah=test.php/foo
where we would end up trying to run the script
test.php?blah=test.php
In the PHP module the format 'file.php/' is treated as a special case in
nxt_php_dynamic_request() where we check the _path_ part of the url for
the string '.php/'.
The problem is that the path actually also contains the query string,
thus we were finding 'test.php/' in the above URL and treating that
whole path as the script to run.
The fix is simple, replace the strstr(3) with a memmem(3), where we can
limit the amount of path we use for the check.
The trick here and what is not obvious from the code is that while
path.start points to the whole path including the query string,
path.length only contains the length of the _path_ part.
NOTE: memmem(3) is a GNU extension and is neither specified by POSIX or
ISO C, however it is available on a number of other systems, including:
FreeBSD, OpenBSD, NetBSD, illumos, and macOS.
If it comes to it we can implement a simple alternative for systems
which lack memmem(3).
This also adds a test case (provided by @dward) to cover this.
Closes: <https://github.com/nginx/unit/issues/781>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Reviewed-by: Andrei Zeliankou <zelenkov@nginx.com> [test]
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
The nxt_websocket_header_t structure defines the layout of a websocket
frame header. As the websocket frame is mapped directly onto this
structure its layout needs to match how it's coming off the network.
The network being big endian means on big endian systems the structure
layout can simply match that of the websocket frame header. On little
endian systems we need to reverse the two bytes.
This was done via the BYTE_ORDER, BIG_ENDIAN and LITTLE_ENDIAN macros,
however these are not universal, e.g they are _not_ defined on illumos
(OpenSolaris / OpenIndiana) and so we get the following compiler errors
In file included from src/nxt_h1proto.c:12:0:
src/nxt_websocket_header.h:25:13: error: duplicate member 'opcode'
uint8_t opcode:4;
^~~~~~
src/nxt_websocket_header.h:26:13: error: duplicate member 'rsv3'
uint8_t rsv3:1;
^~~~
src/nxt_websocket_header.h:27:13: error: duplicate member 'rsv2'
uint8_t rsv2:1;
^~~~
src/nxt_websocket_header.h:28:13: error: duplicate member 'rsv1'
uint8_t rsv1:1;
^~~~
src/nxt_websocket_header.h:29:13: error: duplicate member 'fin'
uint8_t fin:1;
^~~
src/nxt_websocket_header.h:31:13: error: duplicate member 'payload_len'
uint8_t payload_len:7;
^~~~~~~~~~~
src/nxt_websocket_header.h:32:13: error: duplicate member 'mask'
uint8_t mask:1;
^~~~
This commit fixes that by using the new NXT_HAVE_{BIG,LITTLE}_ENDIAN
macros introduced in the previous commit.
Closes: <https://github.com/nginx/unit/issues/297>
Fixes: e501c74 ("Introducing websocket support in router and libunit.")
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
There was a couple of reports of Python applications failing due to the
following type of error
File "/opt/netbox/netbox/netbox/configuration.py", line 25, in _import
print(f"\U0001f9ec loaded config '{path}'")
UnicodeEncodeError: 'ascii' codec can't encode character '\U0001f9ec' in
position 0: ordinal not in range(128)
due to the use of Unicode text in the print() statement.
This only happened for python 3.8+ when using the "home" configuration
option as this meant we were going through the new PyConfig
configuration.
When using this new configuration method with the 'isolated' specific
API (for embedded Python) UTF-8 is disabled by default,
PyPreConfig->utf8_mode = 0.
To fix this we need to setup the Python pre config and enable utf-8
mode. However rather than enable utf-8 unconditionally we can set to it
to -1 so that it will use the LC_CTYPE environment variable to determine
whether to enable utf-8 mode or not. utf-8 mode will be enabled if
LC_CTYPE is either: C, POSIX or some specific UTF-8 locale. This is the
default utf8_mode setting when using the non-isolated PyPreConfig API.
Reported-by: Tobias Genannt <tobias.genannt@kappa-velorum.net>
Tested-by: Tobias Genannt <tobias.genannt@kappa-velorum.net>
Link: <https://peps.python.org/pep-0587/>
Link: <https://docs.python.org/3/c-api/init_config.html#c.PyPreConfig.utf8_mode>
Fixes: 491d0f70 ("Python: Added support for Python 3.11.")
Closes: <https://github.com/nginx/unit/issues/817>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This is a preparatory patch for future work and cleans up the code a
little in the Python 3.8+ variant of nxt_python3_init_config().
The main advantage being we no longer have calls to PyConfig_Clear() in
two different paths.
The variables have a little extra space in their declarations to allow
for the next patch which introduces a variable with a longer type name,
which will help reduce the size of the diff.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This patch gives users the option to set a `"prefix"` attribute
for Python applications, either at the top level or for specific
`"target"`s. If the attribute is present, the value of `"prefix"`
must be a string beginning with `"/"`. If the value of the `"prefix"`
attribute is longer than 1 character and ends in `"/"`, the
trailing `"/"` is stripped.
The purpose of the `"prefix"` attribute is to set the `SCRIPT_NAME`
context value for WSGI applications and the `root_path` context
value for ASGI applications, allowing applications to properly route
requests regardless of the path that the server uses to expose the
application.
The context value is only set if the request's URL path begins with
the value of the `"prefix"` attribute. In all other cases, the
`SCRIPT_NAME` or `root_path` values are not set. In addition, for
WSGI applications, the value of `"prefix"` will be stripped from
the beginning of the request's URL path before it is sent to the
application.
Reviewed-by: Andrei Zeliankou <zelenkov@nginx.com>
Reviewed-by: Artem Konev <artem.konev@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
This is an extension to the previous commit, which made
large_header_buffer_size a valid configuration setting.
This commit makes a related value, large_header_buffers, a valid
configuration setting.
While large_header_buffer_size effectively limits the maximum size of
any single header (although unit will try to pack multiple headers into
a buffer if they wholly fit).
large_header_buffers limits how many of these 'large' buffers are
available. It makes sense to also allow this to be user set.
large_header_buffers is already set by the configuration system in
nxt_router.c it just isn't set as a valid config option in
nxt_conf_validation.c
With this change users can set this option in their config if required
by the following
"settings": {
"http": {
"large_header_buffers": 8
}
},
It retains its default value of 4 if this is not set.
NOTE: This is being released as undocumented and subject to change as it
exposes internal workings of unit.
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
@JanMikes and @tagur87 on GitHub both reported issues with long URLs
that were exceeding the 8192 byte large_header_buffer_size setting,
which resulted in a HTTP 431 error (Request Header Fields Too Large).
This can be resolved in the code by updating the following line in
src/nxt_router.c::nxt_router_conf_create()
skcf->large_header_buffer_size = 8192;
However, requiring users to modify unit and install custom versions is
less than ideal. We could increase the value, but to what?
This commit takes the option of allowing the user to set this option in
their config by making large_header_buffer_size a valid configuration
setting.
large_header_buffer_size is already set by the configuration system in
nxt_router.c it just isn't set as a valid config option in
nxt_conf_validation.c
With this change users can set this option in their config if required
by the following
"settings": {
"http": {
"large_header_buffer_size": 16384
}
},
It retains its default value of 8192 bytes if this is not set.
With this commit, without the above setting or too low a value, with a
long URL you get a 431 error. With the above setting set to a large
enough value, the request is successful.
NOTE: This setting really determines the maximum size of any single
header _value_. Also, unit will try and place multiple values
into a buffer _if_ they fully fit.
NOTE: This is being released as undocumented and subject to change as it
exposes internal workings of unit.
Closes: <https://github.com/nginx/unit/issues/521>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This hooks the cgroup support up to the config system so it can actually
be used.
To make use of this in unit a new "cgroup" section has been added to the
isolation configuration.
e.g
"applications": {
"python": {
"type": "python",
"processes": 5,
"path": "/opt/unit/unit-cgroup-test/",
"module": "app",
"isolation": {
"cgroup": {
"path": "app/python"
}
}
}
}
Now there are two ways to specify the path, relative, like the above
(without a leading '/') and absolute (with a leading '/').
In the above case the "python" application is placed into its own cgroup
under CGROUP_ROOT/<main unit process cgroup>/app/python. Whereas if you
specified say
"path": "/unit/app/python"
Then the python application would be placed under
CGROUP_ROOT/unit/app/python
The first option allows you to easily take advantage of any resource
limits that have already been configured for unit.
With the second method (absolute pathname) if you know of an already
existing cgroup where you'd like to place it, you can, e.g
"path": "/system.slice/unit/python"
Where system.slice has already been created by systemd and may already
have some overall system limits applied which would also apply to unit.
Limits apply down the hierarchy and lower groups can't exceed the
previous group limits.
So what does this actually look like? Lets take the unit-calculator
application[0] and have each of its applications placed into their own
cgroup. If we give each application a new section like
"isolation": {
"cgroup": {
"path": "/unit/unit-calculator/add"
}
}
changing the path for each one, we can visualise the result with the
systemd-cgls command, e.g
│ └─session-5.scope (#4561)
│ ├─ 6667 sshd: andrew [priv]
│ ├─ 6684 sshd: andrew@pts/0
│ ├─ 6685 -bash
│ ├─ 12632 unit: main v1.28.0 [/opt/unit/sbin/unitd --control 127.0.0.1:808>
│ ├─ 12634 unit: controller
│ ├─ 12635 unit: router
│ ├─ 13550 systemd-cgls
│ └─ 13551 less
├─unit (#4759)
│ └─unit-calculator (#5037)
│ ├─subtract (#5069)
│ │ ├─ 12650 unit: "subtract" prototype
│ │ └─ 12651 unit: "subtract" application
│ ├─multiply (#5085)
│ │ ├─ 12653 unit: "multiply" prototype
│ │ └─ 12654 unit: "multiply" application
│ ├─divide (#5101)
│ │ ├─ 12671 unit: "divide" prototype
│ │ └─ 12672 node divide.js
│ ├─sqroot (#5117)
│ │ ├─ 12679 unit: "sqroot" prototype
│ │ └─ 12680 /home/andrew/src/unit-calculator/sqroot/sqroot
│ └─add (#5053)
│ ├─ 12648 unit: "add" prototype
│ └─ 12649 unit: "add" application
We used an absolute path so the cgroups will be created relative to the
main cgroupfs mount, e.g /sys/fs/cgroup
We can see that the main unit processes are in the same cgroup as the
shell from where they were started, by default child process are placed
into the same cgroup as the parent.
Then we can see that each application has been placed into its own
cgroup under /sys/fs/cgroup
Taking another example of a simple 5 process python application, with
"isolation": {
"cgroup": {
"path": "app/python"
}
}
Here we have specified a relative path and thus the python application
will be placed below the existing cgroup that contains the main unit
process. E.g
│ │ │ ├─app-glib-cinnamon\x2dcustom\x2dlauncher\x2d3-43951.scope (#90951)
│ │ │ │ ├─ 988 unit: main v1.28.0 [/opt/unit/sbin/unitd --no-daemon]
│ │ │ │ ├─ 990 unit: controller
│ │ │ │ ├─ 991 unit: router
│ │ │ │ ├─ 43951 xterm -bg rgb:20/20/20 -fg white -fa DejaVu Sans Mono
│ │ │ │ ├─ 43956 bash
│ │ │ │ ├─ 58828 sudo -i
│ │ │ │ ├─ 58831 -bash
│ │ │ │ └─app (#107351)
│ │ │ │ └─python (#107367)
│ │ │ │ ├─ 992 unit: "python" prototype
│ │ │ │ ├─ 993 unit: "python" application
│ │ │ │ ├─ 994 unit: "python" application
│ │ │ │ ├─ 995 unit: "python" application
│ │ │ │ ├─ 996 unit: "python" application
│ │ │ │ └─ 997 unit: "python" application
[0]: <https://github.com/lcrilly/unit-calculator>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This commit hooks into the cgroup infrastructure added in the previous
commit to create per-application cgroups.
It does this by adding each "prototype process" into its own cgroup,
then each child process inherits its parents cgroup.
If we fail to create a cgroup we simply fail the process. This behaviour
may get enhanced in the future.
This won't actually do anything yet. Subsequent commits will hook this
up to the build and config systems.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Firstly, this is not to be confused with CLONE_NEWCGROUP which unit
already supports and is related to namespaces. To re-cap, namespaces
allow processes to have different views of various parts of the system
such as filesystem mounts, networking, hostname etc.
Whereas cgroup[0] is a Linux kernel facility for collecting a bunch of
processes together to perform some task on the group as a whole, for
example to implement resource limits.
There are two parts to cgroup, the core part of organising processes
into a hierarchy and the controllers which are responsible for enforcing
resource limits etc.
There are currently two versions of the cgroup sub-system, the original
cgroup and a version 2[1] introduced in 3.16 (August 2014) and marked
stable in 4.5 (March 2016).
This commit supports the cgroup V2 API and implements the ability to
place applications into their own cgroup on a per-application basis.
You can put them each into their own cgroup or you can group some
together. The ability to set resource limits can easily be added in
future.
The initial use case of this would be to aid in observability of unit
applications which becomes much easier if you can just monitor them on a
per cgroup basis.
One thing to note about cgroup, is that unlike namespaces which are
controlled via system calls such as clone(2) and unshare(2), cgroups are
setup and controlled through the cgroupfs pseudo-filesystem.
cgroup is Linux only and this support will only be enabled if configure
finds the cgroup2 filesystem mount, e.g
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,seclabel,nsdelegate,memory_recursiveprot)
The cgroups are removed on shutdown or as required on reconfiguration.
This commit just adds the basic infrastructure for using cgroups within
unit. Subsequent commits will wire up this support.
It supports creating cgroups relative to the main cgroup root and also
below the cgroup of the main unit process.
[0]: <https://man7.org/linux/man-pages/man7/cgroups.7.html>
[1]: <https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html>
Cc: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Add simple wrapper functions for fopen(3) and fclose(3) that are
somewhat akin to the nxt_file_open() and nxt_file_close() wrappers that
log errors.
Suggested-by: Alejandro Colomar <alx@nginx.com>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Andrei reported an issue with building unit when using '-O0' with GCC
producing the following compiler errors
cc -c -pipe -fPIC -fvisibility=hidden -O -W -Wall -Wextra -Wno-unused-parameter -Wwrite-strings -Wmissing-prototypes -Werror -g -O0 -I src -I build \
\
\
-o build/src/nxt_unit.o \
-MMD -MF build/src/nxt_unit.dep -MT build/src/nxt_unit.o \
src/nxt_unit.c
src/nxt_unit.c: In function ‘nxt_unit_log’:
src/nxt_unit.c:6601:9: error: ‘msg’ may be used uninitialized [-Werror=maybe-uninitialized]
6601 | p = nxt_unit_snprint_prefix(p, end, pid, level);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/nxt_unit.c:6682:1: note: by argument 2 of type ‘const char *’ to ‘nxt_unit_snprint_prefix’ declared here
6682 | nxt_unit_snprint_prefix(char *p, const char *end, pid_t pid, int level)
| ^~~~~~~~~~~~~~~~~~~~~~~
src/nxt_unit.c:6582:22: note: ‘msg’ declared here
6582 | char msg[NXT_MAX_ERROR_STR], *p, *end;
| ^~~
src/nxt_unit.c: In function ‘nxt_unit_req_log’:
src/nxt_unit.c:6645:9: error: ‘msg’ may be used uninitialized [-Werror=maybe-uninitialized]
6645 | p = nxt_unit_snprint_prefix(p, end, pid, level);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/nxt_unit.c:6682:1: note: by argument 2 of type ‘const char *’ to ‘nxt_unit_snprint_prefix’ declared here
6682 | nxt_unit_snprint_prefix(char *p, const char *end, pid_t pid, int level)
| ^~~~~~~~~~~~~~~~~~~~~~~
src/nxt_unit.c:6625:35: note: ‘msg’ declared here
6625 | char msg[NXT_MAX_ERROR_STR], *p, *end;
| ^~~
cc1: all warnings being treated as errors
The above was reproduced with
$ ./configure --cc-opt=-O0 && ./configure python && make -j4
This warning doesn't happen on clang (15.0.4) or GCC (8.3) and seems to
have been introduced in GCC 11. The above is from GCC (12.2.1, Fedora
37).
The trigger of this GCC issue is actually part of a commit I introduced
a few months back to constify some function parameters and it seems the
consensus for how to resolve this problem is to simply remove the const
qualifier from the *end parameter to nxt_unit_snprint_prefix().
Reported-by: Andrei Zeliankou <zelenkov@nginx.com>
Link: <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100417>
Link: <https://github.com/samtools/htslib/pull/1285>
Link: <https://gcc.gnu.org/gcc-11/changes.html>
Fixes: 4418f99 ("Constified numerous function parameters.")
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Starting from Node.js v18.6.0 return value from all hooks must have
"shortCircuit: true" option specified. For more information see:
https://github.com/nodejs/node/commit/10bcad5c6e
|
|
Python 3.8 added a new Python initialisation configuration API[0].
Python 3.11 marked the old API as deprecated resulting in the following
compiler warnings which we treat as errors, failing the build
src/python/nxt_python.c: In function ‘nxt_python_start’:
src/python/nxt_python.c:130:13: error: ‘Py_SetProgramName’ is deprecated [-Werror=deprecated-declarations]
130 | Py_SetProgramName(nxt_py_home);
| ^~~~~~~~~~~~~~~~~
In file included from /opt/python-3.11/include/python3.11/Python.h:94,
from src/python/nxt_python.c:7:
/opt/python-3.11/include/python3.11/pylifecycle.h:37:38: note: declared here
37 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetProgramName(const wchar_t *);
| ^~~~~~~~~~~~~~~~~
src/python/nxt_python.c:134:13: error: ‘Py_SetPythonHome’ is deprecated [-Werror=deprecated-declarations]
134 | Py_SetPythonHome(nxt_py_home);
| ^~~~~~~~~~~~~~~~
/opt/python-3.11/include/python3.11/pylifecycle.h:40:38: note: declared here
40 | Py_DEPRECATED(3.11) PyAPI_FUNC(void) Py_SetPythonHome(const wchar_t *);
| ^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
We actually have a few config scenarios: Python < 3, Python >= 3.0 < 3.8
and for Python 3 we have two configs where we select one based on
virtual environment setup.
Factor out the Python 3 config initialisation into its own function. We
actually create two functions, one for Python 3.8+ and one for older
Python 3. We pick the right function to use at build time.
The new API also has error checking (where the old API doesn't) which we
handle.
[0]: https://peps.python.org/pep-0587/
Closes: <https://github.com/nginx/unit/issues/710>
[ Andrew: Expanded upon patch from @sandeep-gh ]
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
|
|
It's for the introduction of njs support.
For each option that supports native variable and JS template literals introduced next,
it's unified as template string.
No functional changes.
|
|
Unit parsed the case of "$uri$$host" into unknown variables.
This commit makes it invalid variable instead.
|
|
Splitting `nxt_python_add_sptr` into several functions will make future
additions easier.
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
|
|
The casts are unnecessary, since memchr(3)'s argument is 'const void *'.
It might have been necessary in the times of K&R, where 'void *' didn't
exist. Nowadays, it's unnecessary, and _very_ unsafe, since casts can
hide all classes of bugs by silencing most compiler warnings.
The changes from nxt_memchr() to memchr(3) were scripted:
$ find src/ -type f \
| grep '\.[ch]$' \
| xargs sed -i 's/nxt_memchr/memchr/'
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
The casts are unnecessary, since memcmp(3)'s arguments are 'void *'.
It might have been necessary in the times of K&R, where 'void *' didn't
exist. Nowadays, it's unnecessary, and _very_ unsafe, since casts can
hide all classes of bugs by silencing most compiler warnings.
The changes from nxt_memcmp() to memcmp(3) were scripted:
$ find src/ -type f \
| grep '\.[ch]$' \
| xargs sed -i 's/nxt_memcmp/memcmp/'
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Both @lucatacconi & @mwoodpatrick reported what appears to be the same
issue on GitHub. Namely that when using the PHP language module and
trying to access a URL that is a directory but without specifying the
trailing '/', they were getting a '503 Service Unavailable' error.
Note: This is when _not_ using the 'script' option.
E.g with the following config
{
"listeners": {
"[::1]:8080": {
"pass": "applications/php"
}
},
"applications": {
"php": {
"type": "php",
"root": "/var/tmp/unit-php"
}
}
}
and with a directory path of /var/tmp/unit-php/foo containing an
index.php, you would see the following
$ curl http://localhost/foo
<title>Error 503</title>
Error 503
However
$ curl http://localhost/foo/
would work and serve up the index.php
This commit fixes the above so you get the desired behaviour without
specifying the trailing '/' by doing the following
1] If the URL doesn't end in .php and doesn't have a trailing '/'
then check if the requested path is a directory.
2) If it is a directory then create a 301 re-direct pointing to it.
This matches the behaviour of the likes of nginx, Apache and
lighttpd.
This also matches the behaviour of the "share" action in Unit.
This doesn't effect the behaviour of the 'script' option which bypasses
the nxt_php_dynamic_request() function.
This also adds a couple of tests to test/test_php_application.py to
ensure this continues to work.
Closes: <https://github.com/nginx/unit/issues/717>
Closes: <https://github.com/nginx/unit/issues/753>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Future releases of GCC will render function definitions like
func()
invalid by default. See the previous commit 09f88c9 ("Fixed main()
prototypes in auto tests.") for details.
Such functions should be defined like
func(void)
This is a good thing to do regardless of the upcoming GCC changes.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Link: <https://www.openssl.org/docs/man3.0/man7/migration_guide.html>
Cc: Andy Postnikov <apostnikov@gmail.com>
Cc: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Remi Collet <remi@remirepo.net>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
If we don't call SSL_CTX_set_cipher_list(), then it uses the
system's default.
Link: <https://fedoraproject.org/wiki/Changes/CryptoPolicy>
Link: <https://docs.fedoraproject.org/en-US/packaging-guidelines/CryptoPolicies/>
Link: <https://www.redhat.com/en/blog/consistent-security-crypto-policies-red-hat-enterprise-linux-8>
Signed-off-by: Remi Collet <remi@remirepo.net>
Acked-by: Andrei Belov <defan@nginx.com>
[ alx: add changelog and tweak commit message ]
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
This commit removed the $uri auto-append for the "share" option
introduced in rev be6409cdb028.
The main reason is that it causes problems when preparing Unit configurations
to be loaded at startup from the state directory. E.g. Docker. A valid conf.json
file with $uri references will end up with $uri$uri due to the auto-append.
|
|
Reported-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Remi Collet <remi@remirepo.net>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
PHP 8.2 changed the prototype of the function, removing the last
parameter.
Signed-off-by: Remi Collet <remi@remirepo.net>
Cc: Timo Stark <t.stark@nginx.com>
Cc: George Peter Banyard <girgias@php.net>
Tested-by: Andy Postnikov <apostnikov@gmail.com>
Acked-by: Andy Postnikov <apostnikov@gmail.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
pthread_mutex_init(3) may fail for several reasons, and failing to
check will cause Undefined Behavior when those errors happen. Add
missing checks, and correctly deinitialize previously created
stuff before exiting from the API.
Signed-off-by: Alejandro Colomar <alx@nginx.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Reviewed-by: Zhidao HONG <z.hong@f5.com>
|
|
@alejandro-colomar reported that the build was broken on MacOS
cc -o build/unitd -pipe -fPIC -fvisibility=hidden -O -W -Wall -Wextra -Wno-unused-parameter -Wwrite-strings -fstrict-aliasing -Wstrict-overflow=5 -Wmissing-prototypes -Werror -g \
build/src/nxt_main.o build/libnxt.a \
\
\
-L/usr/local/Cellar/pcre2/10.40/lib -lpcre2-8
Undefined symbols for architecture x86_64:
"_nxt_fs_mkdir_parent", referenced from:
_nxt_runtime_pid_file_create in libnxt.a(nxt_runtime.o)
_nxt_runtime_controller_socket in libnxt.a(nxt_controller.o)
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [build/unitd] Error 1
This was due to commit 57fc920 ("Socket: Created control socket & pid file
directories.").
This happened because this commit introduced the usage of
nxt_fs_mkdir_parent() in core code which uses nxt_fs_mkdir(), both of
these are defined in src/nxt_fs.c. It turns out however that this file
doesn't get built on MacOS (or any system that isn't Linux or that
lacks a FreeBSD compatible nmount(2) system call) due to the following
In auto/sources we have
if [ $NXT_HAVE_ROOTFS = YES ]; then
NXT_LIB_SRCS="$NXT_LIB_SRCS src/nxt_fs.c"
fi
NXT_HAVE_ROOTFS is set in auto/isolation
If [ $NXT_HAVE_MOUNT = YES -a $NXT_HAVE_UNMOUNT = YES ]; then
NXT_HAVE_ROOTFS=YES
cat << END >> $NXT_AUTO_CONFIG_H
#ifndef NXT_HAVE_ISOLATION_ROOTFS
#define NXT_HAVE_ISOLATION_ROOTFS 1
#endif
END
fi
While we do have a check for a generic umount(2) which is found on
MacOS, for mount(2) we currently only check for the Linux mount(2) and
FreeBSD nmount(2) system calls. So NXT_HAVE_ROOTFS is set to NO on MacOS
and we don't build src/nxt_fs.c
This fixes the immediate build issue by taking the mount/umount OS
support out of nxt_fs.c into a new nxt_fs_mount.c file which is guarded
by the above while we now build nxt_fs.c unconditionally.
This should fix the build on any _supported_ system.
Reported-by: Alejandro Colomar <alx@nginx.com>
Fixes: 57fc920 ("Socket: Created control socket & pid file directories.")
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
|
|
For consistency use nxt_ruby_exception_log() rather than nxt_alert() in
nxt_ruby_rack_init().
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Ruby applications would fail to start if they were using rack v3
2022/09/28 15:48:46 [alert] 0#80912 [unit] Ruby: Failed to parse rack script
2022/09/28 15:48:46 [notice] 80911#80911 app process 80912 exited with code 1
This was due to a change in the rack API
Rack V2
def self.load_file(path, opts = Server::Options.new)
...
cfgfile.sub!(/^__END__\n.*\Z/m, '')
app = new_from_string cfgfile, path
return app, options
end
Rack V3
def self.load_file(path)
...
return new_from_string(config, path)
end
This patch handles _both_ the above APIs by correctly handling the cases
where we do and don't get an array returned from
nxt_ruby_rack_parse_script().
Closes: <https://github.com/nginx/unit/issues/755>
Tested-by: Andrew Clayton <a.clayton@nginx.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
[ Andrew: Patch by Zhidao, commit message by me with input from Zhidao ]
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
This is a preparatory patch that renames the 'local' and 'local_length'
members of the nxt_unit_request_t structure to 'local_addr' and
'local_addr_length' in preparation for the adding of 'local_port' and
'local_port_length' members.
Suggested-by: Zhidao HONG <z.hong@f5.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
@alejandro-colomar reported an issue on GitHub whereby Unit would fail
to start due to not being able to create the control socket (a Unix
Domain Socket)
2022/08/05 20:12:22 [alert] 21613#21613 bind(6,
unix:/opt/local/unit/var/run/unit/control.unit.sock.tmp)
failed (2: No such file or directory)
This could happen if the control socket was set to a directory that
doesn't exist. A common place to put the control socket would be under
/run/unit, and while /run will exist, /run/unit may well not (/run
is/should be cleared on each boot).
The pid file would also generally go under /run/unit, though this is
created after the control socket, however it could go someplace else so
we should also ensure its directory exists.
This commit will try to create the pid file and control sockets parent
directory. In some cases the user will need to ensure that the rest of
the path already exists.
This adds a new nxt_fs_mkdir_parent() function that given a full path
to a file (or directory), strips the last component off before passing
the remaining directory path to nxt_fs_mkdir().
Cc: Konstantin Pavlov <thresh@nginx.com>
Closes: <https://github.com/nginx/unit/issues/742>
Reported-by: Alejandro Colomar <alx@nginx.com>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Tested-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
When proxy is used, the number of accepted connections is not counted,
This also results in the wrong number of active connections.
|
|
The fixing supports the cookie value with the '=' character.
This is related to #756 PR on Github.
Thanks to changxiaocui.
|
|
In nxt_unit_create() we could leak a mutex created in
nxt_unit_ctx_init().
This could happen if nxt_unit_ctx_init() succeeded but later on we
bailed out of nxt_unit_create(), we would destroy the mutex created in
nxt_unit_create() but not the one created in nxt_unit_ctx_init().
Reorder things so that we do the call to nxt_unit_create() after all the
other checks so if it fails we don't leak the mutex it created.
Co-developed-by: Andrew Clayton <a.clayton@f5.com>
Signed-off-by: Andrew Clayton <a.clayton@f5.com>
Signed-off-by: Alex Colomar <a.colomar@f5.com>
|
|
Found by Coverity (CID 380755).
|
|
|
|
|
|
As was reported[0] by @travisbell on GitHub, if running unit from the
terminal in the foreground when hitting ^C to exit it, the ruby
application processes would segfault if they were using threads.
It's not 100% clear where the actual problem lies, but it _looks_ like
it may be in ruby.
The simplest way to deal with this for now is to just ignore SIGINT in
the ruby application processes. Unit will still receive and handle it,
cleanly shutting everything down.
For people who want to handle SIGINT in their ruby application running
under unit they can still trap SIGINT and it will override the ignore.
[0]: https://github.com/nginx/unit/issues/562#issuecomment-1223229585
Closes: https://github.com/nginx/unit/issues/562
|
