| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A common pattern was to declare variables in functions like
static nxt_str_t ...
Not sure why static, as they were being treated more like string
literals, let's actually make them constants (qualifier wise).
Reviewed-by: Zhidao HONG <z.hong@f5.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
In nxt_php_execute() it is possible we could bail out before cleaning up
the FILE * representing the PHP script to execute.
At this point we only need to call fclose(3) on it.
We could have possibly moved the opening of this file to later in the
function, but it is probably good to bail out as early as possible if we
can't open it.
This was found by Coverity.
Fixes: bebc03c72 ("PHP: Implement better error handling.")
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
On GitHub, @jamesRUS52 reported that the PHP filter_input()[0] function
would just return NULL.
To enable this function we need to run the variables through the
sapi_module.input_filter() function when we call
php_register_variable_safe().
In PHP versions prior to 7.0.0, input_filter() takes 'len' as an
unsigned int, while later versions take it as a size_t.
Now, with this commit and the following PHP
<?php
var_dump(filter_input(INPUT_SERVER, 'REMOTE_ADDR'));
var_dump(filter_input(INPUT_SERVER, 'REQUEST_URI'));
var_dump(filter_input(INPUT_GET, 'get', FILTER_SANITIZE_SPECIAL_CHARS));
?>
you get
$ curl 'http://localhost:8080/854.php?get=foo<>'
string(3) "::1"
string(18) "/854.php?get=foo<>"
string(13) "foo<>"
[0]: <https://www.php.net/manual/en/function.filter-input.php>
Tested-by: <https://github.com/jamesRUS52>
Closes: <https://github.com/nginx/unit/issues/854>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Previously the PHP module would produce one of four status codes
200 OK
301 Moved Permanently
500 Internal Server Error
503 Service Unavailable
200 for successful requests, 301 for cases where the url was a directory
without a trailing '/', 500 for bad PHP or non-existing PHP file and 503
for all other errors.
With this commit we now handle missing files and directories, returning
404 Not Found and files and directories that don't allow access,
returning 403 Forbidden.
We do these checks in two places, when we check if we should do a
directory redirect (bar -> bar/) and in the nxt_php_execute() function.
One snag with the latter is that the php_execute_script() function only
returns success/failure (no reason). However while it took a
zend_file_handle structure with the filename of the script to run, we
can instead pass through an already opened file-pointer (FILE *) via
that structure. So we can try opening the script ourselves and do the
required checks before calling php_execute_script().
We also make use of the zend_stream_init_fp() function that initialises
the zend_file_handle structure if it's available otherwise we use our
own version. This is good because the zend_file_handle structure has
changed over time and the zend_stream_init_fp() function should change
with it.
Closes: <https://github.com/nginx/unit/issues/767>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Create a const char *filename variable to hold
ctx->script_filename.start, which is a much more manageable name and
will negate the need for any more casting in the following commit when
we switch to using a FILE * instead of a filename in
php_execute_script().
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Where possible make use of the zend_stream_init_filename() function
introduced in PHP 7.4.
This is essentially a preparatory patch for switching to using an
already opened file-pointer in nxt_php_execute(). While wrapping this
new code in a PHP version check with a fallback to our own function is
perhaps slightly overkill, it does reduce the diff of the commit that
switches to a FILE *.
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
We're going to use zend_stream_init_filename in a following commit. To
reduce the diff of that change, move the current code that will be
replaced, to a function that has the same interface.
We use strlen(3) here to be able to use an interface without passing the
length, but we will remove that call in a following code, so it has no
performance issues.
Co-developed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
@dward on GitHub reported an issue with a URL like
http://foo.bar/test.php?blah=test.php/foo
where we would end up trying to run the script
test.php?blah=test.php
In the PHP module the format 'file.php/' is treated as a special case in
nxt_php_dynamic_request() where we check the _path_ part of the url for
the string '.php/'.
The problem is that the path actually also contains the query string,
thus we were finding 'test.php/' in the above URL and treating that
whole path as the script to run.
The fix is simple, replace the strstr(3) with a memmem(3), where we can
limit the amount of path we use for the check.
The trick here and what is not obvious from the code is that while
path.start points to the whole path including the query string,
path.length only contains the length of the _path_ part.
NOTE: memmem(3) is a GNU extension and is neither specified by POSIX or
ISO C, however it is available on a number of other systems, including:
FreeBSD, OpenBSD, NetBSD, illumos, and macOS.
If it comes to it we can implement a simple alternative for systems
which lack memmem(3).
This also adds a test case (provided by @dward) to cover this.
Closes: <https://github.com/nginx/unit/issues/781>
Cc: Andrei Zeliankou <zelenkov@nginx.com>
Reviewed-by: Alejandro Colomar <alx@nginx.com>
Reviewed-by: Andrei Zeliankou <zelenkov@nginx.com> [test]
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
The casts are unnecessary, since memcmp(3)'s arguments are 'void *'.
It might have been necessary in the times of K&R, where 'void *' didn't
exist. Nowadays, it's unnecessary, and _very_ unsafe, since casts can
hide all classes of bugs by silencing most compiler warnings.
The changes from nxt_memcmp() to memcmp(3) were scripted:
$ find src/ -type f \
| grep '\.[ch]$' \
| xargs sed -i 's/nxt_memcmp/memcmp/'
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
Both @lucatacconi & @mwoodpatrick reported what appears to be the same
issue on GitHub. Namely that when using the PHP language module and
trying to access a URL that is a directory but without specifying the
trailing '/', they were getting a '503 Service Unavailable' error.
Note: This is when _not_ using the 'script' option.
E.g with the following config
{
"listeners": {
"[::1]:8080": {
"pass": "applications/php"
}
},
"applications": {
"php": {
"type": "php",
"root": "/var/tmp/unit-php"
}
}
}
and with a directory path of /var/tmp/unit-php/foo containing an
index.php, you would see the following
$ curl http://localhost/foo
<title>Error 503</title>
Error 503
However
$ curl http://localhost/foo/
would work and serve up the index.php
This commit fixes the above so you get the desired behaviour without
specifying the trailing '/' by doing the following
1] If the URL doesn't end in .php and doesn't have a trailing '/'
then check if the requested path is a directory.
2) If it is a directory then create a 301 re-direct pointing to it.
This matches the behaviour of the likes of nginx, Apache and
lighttpd.
This also matches the behaviour of the "share" action in Unit.
This doesn't effect the behaviour of the 'script' option which bypasses
the nxt_php_dynamic_request() function.
This also adds a couple of tests to test/test_php_application.py to
ensure this continues to work.
Closes: <https://github.com/nginx/unit/issues/717>
Closes: <https://github.com/nginx/unit/issues/753>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
Reported-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Remi Collet <remi@remirepo.net>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
PHP 8.2 changed the prototype of the function, removing the last
parameter.
Signed-off-by: Remi Collet <remi@remirepo.net>
Cc: Timo Stark <t.stark@nginx.com>
Cc: George Peter Banyard <girgias@php.net>
Tested-by: Andy Postnikov <apostnikov@gmail.com>
Acked-by: Andy Postnikov <apostnikov@gmail.com>
Reviewed-by: Andrew Clayton <a.clayton@nginx.com>
Signed-off-by: Alejandro Colomar <alx@nginx.com>
|
|
This is a preparatory patch that renames the 'local' and 'local_length'
members of the nxt_unit_request_t structure to 'local_addr' and
'local_addr_length' in preparation for the adding of 'local_port' and
'local_port_length' members.
Suggested-by: Zhidao HONG <z.hong@f5.com>
Signed-off-by: Andrew Clayton <a.clayton@nginx.com>
|
|
In PHP, custom fastcgi_finish_request() and overloaded chdir() functions can be
invoked by an OPcache preloading script (it runs when php_module_startup() is
called in the app process setup handler). In this case, there was no runtime
context set so trying to access it caused a segmentation fault.
This closes #602 issue on GitHub.
|
|
Introducting application graceful stop. For now only used when application
process reach request limit value.
This closes #585 issue on GitHub.
|
|
This fixes building module with the development version of PHP after the change:
https://github.com/php/php-src/commit/c732ab400af92c54eee47c487a56009f1d79dd5d
|
|
The "auto_globals_jit" PHP option postponed the initialization of the $_SERVER
global variable until the script using it had been loaded (e. g. via the
"include" expression). As a result, nxt_php_register_variables() could be
called after fastcgi_finish_request() had finished the request and nulled
ctx->req, which thus caused a segmentation fault.
|
|
This closes #525 issue on GitHub.
|
|
This closes #498 issue on GitHub.
|
|
This closes #219 issue on GitHub.
|
|
The php_request_shutdown() function calls sapi_deactivate() that tries to read
request body into a dummy buffer. In our case it's just waste of CPU cycles.
This change is also required for the following implementation of the
fastcgi_finish_request() function, where the request context can be
cleared by the time of finalization.
|
|
This closes #474 PR on GitHub.
|
|
|
|
|
|
This closes #441 PR on GitHub.
|
|
|
|
Using this function in all language modules helps to avoid code duplication
and reduce the size of future patches.
|
|
The nxt_assert macro uses nxt_thread_context, which caused the following linker
error when using it in the library:
ld: illegal thread local variable reference to regular symbol
_nxt_thread_context for architecture x86_64
|
|
|
|
Previously, the log message callback used a generic log function, that relied on the process time cache.
Since there were no time update calls in the application processes, all log lines were printed with the
same time, usually correlated with the process start.
Now, a non-cached logging function from libunit is used.
|
|
|
|
The process abstraction has changed to:
setup(task, process)
start(task, process_data)
prefork(task, process, mp)
The prefork() occurs in the main process right before fork.
The file src/nxt_main_process.c is completely free of process
specific logic.
The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).
The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.
In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.
The module API has changed to:
setup(task, process, conf)
start(task, data)
As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
|
|
|
|
This allows to specify multiple subsequent targets inside PHP applications.
For example:
{
"listeners": {
"*:80": {
"pass": "routes"
}
},
"routes": [
{
"match": {
"uri": "/info"
},
"action": {
"pass": "applications/my_app/phpinfo"
}
},
{
"match": {
"uri": "/hello"
},
"action": {
"pass": "applications/my_app/hello"
}
},
{
"action": {
"pass": "applications/my_app/rest"
}
}
],
"applications": {
"my_app": {
"type": "php",
"targets": {
"phpinfo": {
"script": "phpinfo.php",
"root": "/www/data/admin",
},
"hello": {
"script": "hello.php",
"root": "/www/data/test",
},
"rest": {
"root": "/www/data/example.com",
"index": "index.php"
},
}
}
}
}
|
|
Found by Coverity: CID 354832 and CID 354833.
|
|
For each request, the worker calls the php_execute_script function
from libphp that changes to the script directory before doing its
work and then restores the process directory before returning. The
chdir(2) calls it performs are unnecessary in Unit design. In simple
benchmarks, profiling shows that the chdir syscall code path (syscall,
FS walk, etc.) is where the CPU spends most of its time.
PHP SAPI semantics requires the script to be run from the script
directory. In Unit's PHP implementation, we have two use cases:
- script
- arbitrary path
The "script" configuration doesn't have much need for a working
directory change: it can be changed once at module initialization.
The module needs to chdir again only if the user's PHP script also
calls chdir to switch to another directory during execution.
If "script" is not used in Unit configuration, we must ensure the
script is run from its directory (thus calling chdir before exec),
but there's no need to restore the working directory later.
Our implementation disables mandatory chdir calls with the SAPI
option SAPI_OPTION_NO_CHDIR, instead calling chdir only when needed.
To detect the user's calls to chdir, a simple "unit" extension is
added that hooks the built-in chdir() PHP call.
|
|
|
|
A check for the ".php" extension is added to prevent execution of files
with arbitrary extensions in cases where "index" and "script" options
aren't used.
|
|
|
|
Fixes segfaults with PHP 7.4.
|
|
|
|
|
|
There's no reason to parse "http_status_line"; the PHP interpreter already
does this. If the line contains a valid status code, it's assigned to
"http_response_code".
This also fixes invalid status line handling, where the nxt_int_parse()
function returned -1; it was cast to unsigned, yielding response code 65535.
|
|
|
|
This closes #223 issue on GitHub.
|
|
|
|
According to CGI/1.1 RFC 3875:
The server MUST set this variable; if the Script-URI does not include a
query component, the QUERY_STRING MUST be defined as an empty string ("").
Python's PEP 333(3) allows omitting it in WSGI interface; PHP docs force no
requirements; PSGI and Rack specifications require it even if empty.
When nginx proxies requests over FastCGI, it always provides QUERY_STRING.
and some PHP apps have been observed to fail if it is missing (see issue
#201 on GitHub).
A drawback of this change (besides a small overhead) is that there will be
no easy way to tell a missing query string from an empty one (i.e. requests
with or without the "?" character); yet, it's negligible compared to the
possible benefits of wider application compatibility.
This closes #226 issue on GitHub.
|
|
|
|
Previously, the nxt_router_prepare_msg() function expected server host among
other headers unmodified. It's not true anymore since normalization of the
Host header has been introduced in 77aad2c142a0.
The nxt_unit_split_host() function was removed. It didn't work correctly with
IPv6 literals. Anyway, after 77aad2c142a0 the port splitting is done in router
while Host header processing.
|
|
It turned out they need additional processing to work.
This closes #183 issue on GitHub.
|
